I'm selling a Crestron DM-RMC-4KZ-SCALER-C. Everything is inside the box that should be. The box has been opened. Everything is brand new! still has factory plastic protective coverings! If you've got any questions please feel free to message me and I will get back to you as soon as possible, Thanks!

#84




Description/Specs From Manufacture:


Maximum Cable Lengths
 
 
Resolution		Cable Type
DM-CBL-ULTRA
DM® Ultra Cable		DM-CBL-8G
DM 8G® Cable		Third-Party CAT5e
(or Higher5)
1920x1080 FHD 1080p330 ft (100 m)330 ft (100 m)330 ft (100 m)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 DCI 2K
2048x1152 QWXGA
2560x1080 UWFHD230 ft (70 m)165 ft (50 m)
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 4K UHD
4096x2160 DCI 4K
Video
Scaler4K60 4:4:4 video scaler with motion-adaptive deinterlacer, intelligent frame rate conversion, Deep Color support, HDR10 support, content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect ratio, or 1:1), video wall processing up to 8 wide x 8 high9
Input Signal TypesDM 8G+, HDBaseT, and HDMI with HDR10, Deep Color, and 4K60 4:4:4 support 1
Output Signal TypesHDMI with HDR10, Deep Color, and 4K60 4:4:4 support2
Copy ProtectionHDCP 2.2
Maximum Scaler Input, Pass-Through, and Output ResolutionsCustom resolutions may be supported at pixel clock rates up to 600 MHz*.
*Due to DSC codec limitations, only 4K60 and 4K50 resolutions can be supported at pixel clock rates between 300-600MHz. For detailed information, refer to Online Help Answer ID 1001200.
Scan
Type		ResolutionFrame
Rate		Color
Sampling		Color
Depth
Progressive4096x2160 DCI 4K
and
3840x2160 4K UHD		24 Hz4:4:436 bit
30 Hz4:4:436 bit
60 Hz4:2:236 bit
60 Hz4:4:424 bit
2560x1600 WQXGA60 Hz4:4:436 bit
1920x1080 HD 1080p60 Hz4:4:436 bit
Interlaced (input only)1920x1080 HD 1080i30 Hz4:4:436 bit
Audio
Input Signal TypesDM 8G+, HDBaseT, HDMI
Output Signal TypesHDMI, analog stereo3
Digital FormatsDolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
Analog FormatsStereo 2-channel3
Digital-To-Analog Conversion24-bit 48 kHz
Analog PerformanceFrequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >90 dB
Analog Volume Adjustment-80 to 0 dB
Communications
Ethernet100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
RS-2322-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system)
IR/Serial1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system)
DigitalMediaDM 8G+, HDCP 2.2, EDID, CEC, PoDM+, Ethernet
HDBaseTHDCP 2.2, EDID, CEC, PoE+, Ethernet
HDMIHDCP 2.2, EDID, CEC
NOTE: Supports management of HDCP and EDID. Also supports management of CEC between the connected HDMI and/or HDBaseT device(s) and a control system.
Connectors
COM(1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR 1 – 2(1) 4-pin 3.5 mm detachable terminal block;
Comprises (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
AUDIO OUT L, R(1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output3;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
RELAY 1 – 2(1) 4-pin 3.5 mm detachable terminal block;
Comprises (2) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
Ground(1) 6-32 screw;
Chassis ground lug
24VDC 1.25A MAX(1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2412WU power pack sold separately
DM IN(1) 8-pin RJ45 female, shielded;
DM 8G+ input, HDBaseT standard compliant;
PoDM+ PD (Powered Device) port (HDBaseT PoE+ compatible)7, 8;
Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device or to an HDBaseT device via CAT5e, Crestron DM-CBL-8G or Crestron DM-CBL-ULTRA cable5
HDMI IN(1) 19-pin Type A connector, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort™ compatible1)
HDMI OUT(1) 19-pin Type A connector, female;
HDMI digital video/audio output (DVI compatible2)
LAN(1) 8-pin RJ-45 female, shielded;
100Base-TX Ethernet port
Controls and Indicators
RESET(1) Recessed push button, for hardware reset
SETUP(1) Red LED and (1) recessed push button, for Ethernet setup
LAN(2) LEDs, green indicates Ethernet link is established, flashing amber indicates Ethernet activity
HDMI OUT(1) Green LED, indicates video signal is detected at the HDMI output
HDMI IN(1) LED, solid green indicates video signal is detected at the HDMI IN port and is the active input source, flashing green indicates video signal is detected at the HDMI IN port but is not the active input source
INPUT SELECT(1) Push button for manual input selection
DM IN(1) LED, solid green indicates video signal is detected at the DM IN port and is the active input source, flashing green indicates video signal is detected at the DM IN port but is not the active input source
DM IN (RJ-45)(2) LEDs, green indicates DM or HDBaseT link is established; solid amber indicates HDCP video is detected at the input, flashing amber indicates non‑HDCP video is detected at the input
24 VDC(1) Green LED, indicates operating power supplied via PoDM+, HDBaseT PoE+, or local power pack
Power
Power over DMIEEE 802.3at Type 2 Class 4 (25.5 W) compliant PoDM+ PD (Powered Device), capable of being powered by PoDM+ PSE (Power Sourcing Equipment)7
Power over HDBaseTIEEE 802.3at Type 2 Class 4 (25.5 W) compliant HDBaseT PoE+ PD (Powered Device), capable of being powered by an HDBaseT PoE+ PSE (Power Sourcing Equipment)8
Power Pack (Optional)Input: 100‑240 Volts AC, 50/60 Hz;
Output: 1.25 Amps @ 24 Volts DC;
Model: PW-2412WU  (sold separately)
Power Consumption18.2 Watts
Environmental
Temperature32° to 104° F (0° to 40° C)
Humidity10% to 90% RH (non-condensing)
Heat Dissipation62.1 BTU/hr
Enclosure
ChassisMetal, black finish, with (2) integral mounting flanges, vented top and sides
MountingFreestanding, surface mount, or attachment to a single rack rail
Dimensions
Height9.18 in. (233 mm)
Width5.35 in (136 mm)
Depth1.33 in (34 mm)
Weight
1.25 lb (567 g)