Mono Right Angle TS 1/4" Jack to Male XLR Cable Unbalanced

Ultra Pure Oxygen Free Copper. Flexible Dual Screen Cable

Choose your cable colour from the drop-down menus.

Choose your cable length from the drop-down menus.

For use with instruments and outputs that are unbalanced. Plug the Jack into the output, plug the XLR directly into the input. We have used dual screened instrument cable this greatly lowers noise levels. Many cheaper cables will not have a dual screen and will suffer from noise pickup.

What is a screen? it is basically a cage that surrounds the inner cable that carries the audio signal. In this cable there are two screens, an outer spiral screen made of copper strands and the other under the outer screen made from a conductive layer. The screen in this cable has a much better coverage which reduces noise from entering into the inner conducting signal cable. 

The lead is made with Neutrik connectors and Van Damme dual screened oxygen free ultra-pure copper Instrument cable, these are extremely well known brands known for very high quality sound and robustness. The cable is silver plated within the inner single signal cable, this helps give a brighter more dynamic sound.

We make professional leads please see our shop for more leads. This lead is made using 4% silver solder using advanced soldering equipment. We have been in the industry for over 30 years and have seen many advancements in this time, we like to keep a head of the rest by giving our best.

Length - Up to 1m will be visible length cable. Over 1m will be cut length. 110mm is used within the connectors. Many sellers do not make clear what you are buying, we like to be precise with our descriptions.

Typical applications for this lead:

Guitar/instrument to XLR Input of Mixer
Guitar/instrument to XLR Input of guitar amplifier
Guitar/instrument to XLR Input of Di Box
Patch - Effects pedal to XLR input

More applications can be achieved, if in doubt please ask.

Connections are made on:

Pin 2 XLR - Tip Jack
Pin 1 3 XLR linked - Sleeve Jack

This is unbalanced configuration - Outer shell is also connected to this for extra screening.

 This listing is for 1 lead.

Cable

Van Damme Instrument cable - Please see colour available from the drop-down menus.

Cable Specification:

Van Damme Pro Grade Classic XKE Instrument Cable with a relatively low capacitance unbalanced audio cable used with guitars, keyboards and other unbalanced output devices. Its tight construction and dual screens of conductive thermoplastic and close lapped copper ensure noise free handling and excellent noise rejection due to dual screening making this cable ideal for on stage use.

Low noise and high flexibility for on stage use etc

Dual thermoplastic/lapped copper screens for excellent noise rejection

Ultra-pure oxygen free copper for outstanding sonic integrity.


Mechanical Specification
Conductors 3 x 0.20 mm silver plated ultra-pure oxygen-free copper
4 x 0.20 mm bare ultra-pure oxygen-free copper
Conductor size 7 x 0.20 mm, 0.22 mm2, AWG 24/7
Insulation Foamed polyethylene
Screen 1 0.40 mm conductive thermoplastic
Screen 2 80 x 0.10 mm close lap spiral bare oxygen-free copper
Jacket material Flexible PVC/Neoprene composite
Overall diameter 6.00 ± 0.15 mm
Bend radius 10 x overall diameter
Operating temperature -20 to +70 ⁰C

Electrical Specification
Resistance Conductor < 90 Ohm/km
Insulation > 5000 M Ohm/km
Capacitance Core to screen 90 pF/m

Connectors Neutrik

Neutrik Male XLR 3 pin (NC3MXX) to Mono 1/4" (NPR2X) Jack Nickel. Note these are genuine Neutrik connectors.

Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms