Wonderful sounding in 2 channel stereo and 5.1 channel surround sound. If you haven’t heard an Arcam receiver before you will be amazed at the sound quality and build quality. Please review the photos to evaluate the great condition as it has been well taken care of.
The receiver comes with owner’s manual and power cord. There is no remote control, but all functions can be controlled from buttons on the front panel. This unit can be operated with a universal remote as well.
Bi-wiring and bi-amping options can take the sound to even greater heights.
If you are looking for a musical 5.1receiver that excels in 2 channel stereo this unit is for you.
AVR100 SPECIFICATIONS
Dolby Digital, DTS 5.1, Dolby Pro Logic
RDS tuner
Six-channel inputs and outputs
550VA toroidal transformer
Removable IEC power cord
Analog path for two-channel sources
Two coaxial and one TosLink pre-assigned digital inputs
Three S-video inputs and four composite video inputs
Two audio/video tape loops (one S-Video/composite and one composite only)
One audio-only tape loop and one audio-only input
AMPLIFIER SPECIFICATION
Output power (20Hz–20kHz at 0.5%THD)
8Ω, five channels 70W
8Ω, two channels 90W
8Ω, single channel 100W
Harmonic distortion, 1W, 8Ω at 1kHz 0.02% typical
RADIO SPECIFICATION
FM section
30 preset stations available
RDS Station Identification, Radio Data Display
FM tuning range 87.5 to108MHz
FM sensitivity < 6µV
THD: mono < 0.25%
stereo < 0.35%
Signal/noise ratio:
mono > 72dB
stereo > 66dB
Pilot tone suppression> 60dB
Alternate channel selectivity IHF > 60dB
Capture ratio < 3dB
AM section
10 preset stations available
AM tuning range
10kHz step 530 to1710kHz
9kHz step 531 to1602kHz
Usable sensitivity <30µV
IF rejection > 36dB
Signal/noise ratio, 5mVinput > 38dB
THD, 5mV input < 3%