|
1 Color Screen Printing Table Printer - Slide Holder |
|
Please note screen frame is not included.
|
|
|
The pallet is free of the pallet adhesive, no need to scratch the pallet adhesive, just press the rubber strip into the pallet slot after the position of the substrate is confirmed. After printing, take out the rubber strip, remove the substrate.
|
|
|
According to the size of the screen plate to move the shaft positioning plate, shorten the moving distance of the screen plate Chuck width is 250 mm; Depth is 45 mm; Height is 67 mm, (9.8x 1.7x 2.6inch) it is suitable for the screen frame within thickness of 40 mm, 1.5in The chuck can move up and down 25 mm, 1inch.
|
|
|
|
|
|
The printing station can be on the left and moved to the right after the printing is finished. If the operator is used to printing on the right side, the slider on the chuck can be removed and installed on the right side of the chuck. At the same time, reinstall the replaced additional plate on the left and right side then move the chuck support plate to the left to realize right side printing. After the printing is completed. the slider can be moved to the left side. |
|
|
|
|
|
