|
|
|
|
|
|
Newest Fitment:
1997-1999 Buick Park Avenue 3.8L
Features:
-OE design to ensure exact fit, form and function for an easy drop-in installation;
-Built with high density multi-lowered fins for maximum cooling efficiency;
-ISO 9001 certified manufacturing plants;
-Direct Replacement;
-Improve Cooling Efficiency;
-100% Leak Tested;
-Plastic tanks with aluminum core;
-Built to strict quality control standards;
Compatibility:
| Make | Model | Year | Submodel | Fuel | Liter | Engine |
| Buick | Park Avenue | 1997 | Base | GAS | 3.8 | V6 |
| Buick | Park Avenue | 1997 | Ultra | GAS | 3.8 | V6 |
| Buick | Park Avenue | 1998 | Base | GAS | 3.8 | V6 |
| Buick | Park Avenue | 1998 | Ultra | GAS | 3.8 | V6 |
| Buick | Park Avenue | 1999 | Base | GAS | 3.8 | V6 |
| Buick | Park Avenue | 1999 | Base | GAS | 3.8 | V6 |
| Buick | Park Avenue | 1999 | Ultra | GAS | 3.8 | V6 |
| Buick | Park Avenue | 1999 | Ultra | GAS | 3.8 | V6 |
Specifications:
| Core Material | Aluminum |
| Tank Materia | Plastic |
| Height | 30-1/2 In |
| Width | 15 In |
| Thickness | 5/8 In |
| Inlet Header | 18-3/4 In. x 2-3/8 In |
| Outlet Header | 18-3/4 In. x 2-3/8 In |
| Inlet | 1-5/16 In |
| Outlet | 1-9/16 In |
| TOC | 11-1/2 In.(4 Plates) |
How to clean radiator:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
How to replace the radiator:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)
Note:
1. Project operation, the vehicle normal temperature 60 to 80 degrees.
2. Add detergent if the tank is too full can take some antifreeze.
Package:
1pcs of brand new radiator
| Item Specifics | |
|---|---|
| Brand | Ignition |
| Manufacturer Part Number | 054455-ign |
| Warranty | 1 Year |
| Interchange Part Number | CU1880,1880 |
| Other Part Number | GM3010118,52469787,52469789,52477792 |
| Surface Finish | Aluminum |
| Product Type | Radiator |
| Package Include | 1pc Radiator |
| Fitment Type | Direct Replacement |
| Core Material | Aluminum |
| Placement on Vehicle | Front |
| Tank Material | Plastic |
| Custom Bundle | No |
| Mounting Hardware Included | No |
| Color | Silver or Black |
| Radiator Cap | As picture shows |
| Height | 30-1/2 In. |
| Width | 15 In. |
| Thickness | 5/8 In. |
- Orders processed within 24-48 hours of payment verification.
- We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
- The images shown are not the actual item and are for your reference only.
- Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
- We accept payment via PAYPAL only.
- Payment must be made within 4 days of auction closing.
- S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
- 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
- Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible).
- You agree to all of the above-listed policies upon bidding on and winning this auction!
- We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- It is impossible to address issues if we do not know about them!
Store Cat. New List Item
Hot Item
|
Aluminum Radiator for 1997-1999 Buick Park Avenue 3.8L For 1880
Newest Fitment: 1997-1999 Buick Park Avenue 3.8L
Features: -OE design to ensure exact fit, form and function for an easy drop-in installation; -Built with high density multi-lowered fins for maximum cooling efficiency; -ISO 9001 certified manufacturing plants; -Direct Replacement; -Improve Cooling Efficiency; -100% Leak Tested; -Plastic tanks with aluminum core; -Built to strict quality control standards;
Compatibility:
How to clean radiator: 1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system. 2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
How to replace the radiator: 1. Disconnect the battery. 2. Drain the radiator fluid into a suitable container. 3. Remove the old radiator: -Take off any plastic covers around the radiator. -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly. -Disconnect the radiator hoses from the radiator. -Disconnect the transmission cooling lines from the bottom of the radiator. -Remove any clamps, brackets, or screws holding the radiator inside its frame. -Lift the radiator up and out of the car. 4. Install the new radiator: -Slide the new radiator into place. -Connect any clamps or brackets that hold the radiator in place. -Connect the transmission cooling lines carefully. -Connect the engine cooling hoses to the radiator. -Replace the fan and fan shroud. -Reconnect the fan electrical connection. -Replace the plastic covers. 5. Fill the radiator with fluid. 6. Check your work to make sure that there are no leaks. (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan) Note: Do please keep children and pets away when replacing the radiator)
Note: 1. Project operation, the vehicle normal temperature 60 to 80 degrees. 2. Add detergent if the tank is too full can take some antifreeze.
Package: 1pcs of brand new radiator WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification.
▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
▪ The images shown are not the actual item and are for your reference only.
▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
Copyright of ignition-coil. All rights reserved. |
