• 146PC For Fender Door Hood Bumper Trim Clip Retainer Fastener Assortment
  •  
  • Specification:
  • 10 Pcs Door Trim Panel Retainer
  • White Nylon
  • Top Head Diameter: 13mm
  • Middle Head Diameter: 15.5mm
  • Bottom Head Diameter: 18mm
  • Stem Length: 14mm
  • Overall Length: 20.5mm
  • Stem Diameter: 9.5mm
  • For Isuzu Replaces 8942264920
  • For Mazda Replaces 9927-40-825
  • For Toyota Replaces 67771-01010
  • For Toyota Replaces 67771-12010
  • For Auveco A14269
  •  
  • 18 Pcs Nylon Screw Grommet
  • Natural Nylon
  • #10 Screw Size
  • Width: 13mm
  • Length: 13mm
  • Snaps Into 8.5mm x 8.5mm Hole
  • For Toyota Replaces 90189-06010
  • For Toyota Fender Door Hood Bumper Trim Clip Retainer Fastener Assortment EAC

    146PC For Fender Door Hood Bumper Trim Clip Retainer Fastener Assortment

     

    Specification:

    10 Pcs Door Trim Panel Retainer

    White Nylon

    Top Head Diameter: 13mm

    Middle Head Diameter: 15.5mm

    Bottom Head Diameter: 18mm

    Stem Length: 14mm

    Overall Length: 20.5mm

    Stem Diameter: 9.5mm

    For Isuzu Replaces 8942264920

    For Mazda Replaces 9927-40-825

    For Toyota Replaces 67771-01010

    For Toyota Replaces 67771-12010

    For Auveco A14269

     

    18 Pcs Nylon Screw Grommet

    Natural Nylon

    #10 Screw Size

    Width: 13mm

    Length: 13mm

    Snaps Into 8.5mm x 8.5mm Hole

    For Toyota Replaces 90189-06010

    For Honda Replaces 75521-611-0000

    For Mazda Replaces 9991-00-601

    Fits For Nissan Replaces 96706-P0105

    For Auveco A14274

     

    12 Pcs Screw Type Retainer

    Material: Black Nylon

    Head Diameter: 15mm

    Stem Length: 12mm

    Fits Into 7mm Hole

    For Auveco A14260

    For GM Replace 20426301

    For Mazda Replace 9926-50-625

    For Toyota Replace 90467-06017

    For Toyota Replace 90467-06017-20

    For Toyota Replace 90467-06017-41

     

    18 Pcs Headlight And Grill Nut

    #10 Screw Size

    12mm Wide, 12mm Long

    Fits into 8mm x 9mm Hole

    For Toyota Replaces 90189-05013

    For Mitsubishi Replaces MS-480002

    For Auveco A13932

     

    10 Pcs Fender Liner Retainer

    Push Type Clip

    Black Nylon

    Head Diameter: 20mm (13/16")

    Stem Length: 8mm (5/16")

    Fits Hole Size: 7mm (9/32")

    Fits For Toyota Replaces 90467-07166

    For Auveco A18888

     

    12 Pcs #10 Screw Grommet

    Natural Nylon

    #10 Screw Size

    Head Diameter: 18 mm (23/32 inches)

    Stem Length: 17 mm (21/32 inches)

    Fits Into 8.5 mm Square Hole

    Fits For Nissan Replaces 01281-00023

    Fits For Toyota Replaces 90189-06001

    Fits For Mitsubishi Replaces MB-098145

    Fits For Alfa / For Fiat / For Lancia

    Replaces 14203780

    For Auveco A14275

     

    10 Pcs Rear Bumper Cover Clip

    Push-Type Retainer

    Black Nylon

    Head Diameter 18mm (0.71 inch)

    Stem Length 28mm (1.10 inch)

    Fits into 9mm Hole (0.35 inch)

    Fits For Tercel 1988-On

    Fits For Camry 1988-On

    Fits For Celica 1996-On

    Fits For 4 Runner 2003-On

    Fits For Hi-lux 2003-On

    Fits For Toyota Replaces 52161-16010

    Fits For Toyota Replaces 52161-02020

    For Auveco A18873

     

     12 Pcs Screw Grommet With Sealer

    #6 Screw Size

    Natural Nylon

    Head Diameter: 14mm

    Stem Length: 10mm

    Fits Into 7mm x 7mm Hole

    For Honda Replaces 90662-693-0030

    For Honda Replaces 90662-693-003

    For Toyota Replaces 9018-04066

    For Auveco A14281

     

    18 Pcs Trim Panel & Hood Seal Clip

    Black Nylon

    Head Diameter: 13mm

    Stem Length: 11mm

    Fits Into 5mm Hole

    For Toyota Replace 90467-08004

    For Toyota Replace 90467-08011

    For GM Replace 94842841, 94849113

    For Geo Prizm 1985-On

    For Nova 1985-On

    For Auveco A18297

     

    8 Pcs Front & Rear Wheel

    Fender Liner Screw Grommet

    Black Nylon

    #12 Screw Size

    Head Diameter: 16mm

    Stem Length: 19mm

    Fits Into 9mm x 9mm Hole

    For Toyota Replaces 90189-06028

    For Tacoma, T100 & 4 Runner 1992-On

    For GM Replaces 94854203

    For Chevrolet Nova & Prizm 1985-On

    For Pontiac Vibe 1985-On

    For Auveco A19194

     

    8 Pcs Hood Insulation Retaining Clip

    Hood Pad Insulation, Package Tray

    Panel, Luggage Compartment Mat

    Black Nylon

    Head Diameter: 30mm

    Stem Length: 17mm

    Fits 7mm Hole

    Panel Thickness: 6mm

    Fits For MR2 1989-On

    For GM Nova 1985-On

    For Toyota Replaces 90467-09008

    For Auveco A14738

     

    10 Pcs Screw Grommet

    Black Nylon

    1/4" (#14) or M6.3-1.81 Screw Size

    Head Diameter: 20mm

    Stem Length: 17mm

    Fits Into 8mm x 8mm Hole

    For Toyota Replaces 90189-06013

    For Toyota Replaces 96706-W100

    For Auveco A14267

     

     

     

    Features:

    *Superior material

    Adopt to excellent metal and plastic materials to prevent it from corrosion and cracking.

    *Easy installation

    Simple installation with direct replacement, other modification is not required.

    *Please Note:

    Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us via eBay Message, before return.

    *Usage

    They can be used for Hood, Bumper, Fender Liner Retainer, Rear Bumper Cover Clip Push-Type Retainer, Screw Type Retainer, Door Trim Panel Retainer, Trim Panel & Hood Seal Clip, Nylon Screw Grommet replacement. It fits for Auto Car SUV Off-Road Pickup Truck.

     

    Packaging include:

    10 Pcs Door Trim Panel Retainer

    18 Pcs Nylon Screw Grommet

    12 Pcs Screw Type Retainer

    18 Pcs Headlight And Grill Nut

    10 Pcs Hood, Bumper, Fender

    12 Pcs #10 Screw Grommet

    10 Pcs Rear Bumper Cover Clip

    12 Pcs Screw Grommet With Sealer

    18 Pcs Trim Panel & Hood Seal Clip

    8 Pcs Front & Rear Wheel

    8 Pcs Hood Insulation Retaining Clip

    10 Pcs Screw Grommet


    Item Specifics
    Brand Unbranded
    Manufacturer Warranty 2 Years
    Type Plastic Push-Type Bumper Retainer Clip
    Placement on Vehicle Front, Rear, Left, Right, Upper, Lower
    Fitment Type Direct Replacement
    Color Black
    Material Plastic
    Universal Fitment Yes
    Attachment Type Clip-On
    Features Easy Installation, Heat Resistant, No Drilling Required
    Suitable for Under Engine Splash Guard Rivet Fastener Clips
    Application Screw Fender Body Door Trim Panel Hood

    Payment

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    Shipping

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    Returns

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    Contact Us

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    FAQ

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Picture
    For Toyota Fender Door Hood Bumper Trim Clip Retainer Fastener Assortment EAC

    146PC For Fender Door Hood Bumper Trim Clip Retainer Fastener Assortment

     

    Specification:

    10 Pcs Door Trim Panel Retainer

    White Nylon

    Top Head Diameter: 13mm

    Middle Head Diameter: 15.5mm

    Bottom Head Diameter: 18mm

    Stem Length: 14mm

    Overall Length: 20.5mm

    Stem Diameter: 9.5mm

    For Isuzu Replaces 8942264920

    For Mazda Replaces 9927-40-825

    For Toyota Replaces 67771-01010

    For Toyota Replaces 67771-12010

    For Auveco A14269

     

    18 Pcs Nylon Screw Grommet

    Natural Nylon

    #10 Screw Size

    Width: 13mm

    Length: 13mm

    Snaps Into 8.5mm x 8.5mm Hole

    For Toyota Replaces 90189-06010

    For Honda Replaces 75521-611-0000

    For Mazda Replaces 9991-00-601

    Fits For Nissan Replaces 96706-P0105

    For Auveco A14274

     

    12 Pcs Screw Type Retainer

    Material: Black Nylon

    Head Diameter: 15mm

    Stem Length: 12mm

    Fits Into 7mm Hole

    For Auveco A14260

    For GM Replace 20426301

    For Mazda Replace 9926-50-625

    For Toyota Replace 90467-06017

    For Toyota Replace 90467-06017-20

    For Toyota Replace 90467-06017-41

     

    18 Pcs Headlight And Grill Nut

    #10 Screw Size

    12mm Wide, 12mm Long

    Fits into 8mm x 9mm Hole

    For Toyota Replaces 90189-05013

    For Mitsubishi Replaces MS-480002

    For Auveco A13932

     

    10 Pcs Fender Liner Retainer

    Push Type Clip

    Black Nylon

    Head Diameter: 20mm (13/16")

    Stem Length: 8mm (5/16")

    Fits Hole Size: 7mm (9/32")

    Fits For Toyota Replaces 90467-07166

    For Auveco A18888

     

    12 Pcs #10 Screw Grommet

    Natural Nylon

    #10 Screw Size

    Head Diameter: 18 mm (23/32 inches)

    Stem Length: 17 mm (21/32 inches)

    Fits Into 8.5 mm Square Hole

    Fits For Nissan Replaces 01281-00023

    Fits For Toyota Replaces 90189-06001

    Fits For Mitsubishi Replaces MB-098145

    Fits For Alfa / For Fiat / For Lancia

    Replaces 14203780

    For Auveco A14275

     

    10 Pcs Rear Bumper Cover Clip

    Push-Type Retainer

    Black Nylon

    Head Diameter 18mm (0.71 inch)

    Stem Length 28mm (1.10 inch)

    Fits into 9mm Hole (0.35 inch)

    Fits For Tercel 1988-On

    Fits For Camry 1988-On

    Fits For Celica 1996-On

    Fits For 4 Runner 2003-On

    Fits For Hi-lux 2003-On

    Fits For Toyota Replaces 52161-16010

    Fits For Toyota Replaces 52161-02020

    For Auveco A18873

     

     12 Pcs Screw Grommet With Sealer

    #6 Screw Size

    Natural Nylon

    Head Diameter: 14mm

    Stem Length: 10mm

    Fits Into 7mm x 7mm Hole

    For Honda Replaces 90662-693-0030

    For Honda Replaces 90662-693-003

    For Toyota Replaces 9018-04066

    For Auveco A14281

     

    18 Pcs Trim Panel & Hood Seal Clip

    Black Nylon

    Head Diameter: 13mm

    Stem Length: 11mm

    Fits Into 5mm Hole

    For Toyota Replace 90467-08004

    For Toyota Replace 90467-08011

    For GM Replace 94842841, 94849113

    For Geo Prizm 1985-On

    For Nova 1985-On

    For Auveco A18297

     

    8 Pcs Front & Rear Wheel

    Fender Liner Screw Grommet

    Black Nylon

    #12 Screw Size

    Head Diameter: 16mm

    Stem Length: 19mm

    Fits Into 9mm x 9mm Hole

    For Toyota Replaces 90189-06028

    For Tacoma, T100 & 4 Runner 1992-On

    For GM Replaces 94854203

    For Chevrolet Nova & Prizm 1985-On

    For Pontiac Vibe 1985-On

    For Auveco A19194

     

    8 Pcs Hood Insulation Retaining Clip

    Hood Pad Insulation, Package Tray

    Panel, Luggage Compartment Mat

    Black Nylon

    Head Diameter: 30mm

    Stem Length: 17mm

    Fits 7mm Hole

    Panel Thickness: 6mm

    Fits For MR2 1989-On

    For GM Nova 1985-On

    For Toyota Replaces 90467-09008

    For Auveco A14738

     

    10 Pcs Screw Grommet

    Black Nylon

    1/4" (#14) or M6.3-1.81 Screw Size

    Head Diameter: 20mm

    Stem Length: 17mm

    Fits Into 8mm x 8mm Hole

    For Toyota Replaces 90189-06013

    For Toyota Replaces 96706-W100

    For Auveco A14267

     

     

     

    Features:

    *Superior material

    Adopt to excellent metal and plastic materials to prevent it from corrosion and cracking.

    *Easy installation

    Simple installation with direct replacement, other modification is not required.

    *Please Note:

    Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us via eBay Message, before return.

    *Usage

    They can be used for Hood, Bumper, Fender Liner Retainer, Rear Bumper Cover Clip Push-Type Retainer, Screw Type Retainer, Door Trim Panel Retainer, Trim Panel & Hood Seal Clip, Nylon Screw Grommet replacement. It fits for Auto Car SUV Off-Road Pickup Truck.

     

    Packaging include:

    10 Pcs Door Trim Panel Retainer

    18 Pcs Nylon Screw Grommet

    12 Pcs Screw Type Retainer

    18 Pcs Headlight And Grill Nut

    10 Pcs Hood, Bumper, Fender

    12 Pcs #10 Screw Grommet

    10 Pcs Rear Bumper Cover Clip

    12 Pcs Screw Grommet With Sealer

    18 Pcs Trim Panel & Hood Seal Clip

    8 Pcs Front & Rear Wheel

    8 Pcs Hood Insulation Retaining Clip

    10 Pcs Screw Grommet

    Item Specifics
    Brand :Unbranded
    Manufacturer Warranty :2 Years
    Type :Plastic Push-Type Bumper Retainer Clip
    Placement on Vehicle :Front, Rear, Left, Right, Upper, Lower
    Fitment Type :Direct Replacement
    Color :Black
    Material :Plastic
    Universal Fitment :Yes
    Attachment Type :Clip-On
    Features :Easy Installation, Heat Resistant, No Drilling Required
    Suitable for :Under Engine Splash Guard Rivet Fastener Clips
    Application :Screw Fender Body Door Trim Panel Hood


    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.


    All rights reserved.



    On Mar 21, 2024 at 20:19:04 PDT, seller added the following information:

    DataCaciques