Audi A6 C6 / Q7 Steering Module PCB Repair Kit

Fault Symptoms:

A faulty microswitch or relay can cause one or more of these symptoms:

* Fault code 00288 
* Vehicle immobilized
* Takes several attempts to start car
* No ignition, vehicle won't start
* Makes Clicking noise when key inserted


Compatible Audi Models:

A6 C6 2004 - 2009
Q7 2004 - 2009

Contents:

3 x Microswitches
2 x Microswitch levers
1 x Relay

Reprogramming or Coding Required?

Simply answer it depends on the symptom

If you are still able to start the car, even if it takes several attempts, then you do not need to recode or reprogram anything. You can simply fit the module back in. This is an advantage of installing these tiny parts over replacing the module with a new or used one. However, if you are unable to start the car, then reprogramming will be necessary.

Module location:

On the lower half of the steering column
There is no need to remove the whole steering lock.

Important Note!
Disconnect battery and wait 10 minutes before removing the module or disconnecting any wiring for energy to drain.