Custom Dashboard Covers - Made in the USA

These dash covers are designed to sit on top of the dash to cover it. They protect the dash from cracking, reduce heat build up and cover up cracks if your dash already has them. Our dash covers come in many fabrics and colors. We do not make PLASTIC dash caps. We do not offer replacement dashboards nor original dashboard repair.

Every dash cover is cut and sewn. Material choices include upholstery grade fabrics in a 3 part lamination with foam cores as well as non-woven plush carpet.

We don't offer "heat molded" products or plastic molded dash caps.

Hook-and-loop fasteners / Hook-and-pile fasteners hook strips come with each dash cover. They have an adhesive backing. With all Carpet colors, they sew in many small squares of Hook-and-loop fasteners / Hook-and-pile fasteners loop because the hook does not stick well the the back side of the carpet. With all fabric Dash Covers that have foam in the middle layer, the back side fabric acts like Hook-and-loop fasteners / Hook-and-pile fasteners Loop so no small loop squares are sew in. Just stick the hook anywhere.

Also, the forward edge of the Dash Cover may need to be tucked into the space between the dash and windshield glass. This anchors the Dash Cover and holds it in place even with the defrost fan on max.

Using the supplied Hook-and-loop fasteners / Hook-and-pile fasteners is optional. Some people prefer not to use it. Some dashes have complicated geometry and a dash cover will not stay without it. We provide it - you decide if you want to use it.

The adhesive will not harm your dash. However, it may not stick properly if your dash has been treated with a detailing product like Armor All. Use cleaning alcohol to clean areas of your dash where you want Hook-and-loop fasteners / Hook-and-pile fasteners.

Starting in the early 1990's and depending on your Make/Model and option package, your vehicle may have an Airbag built into the dash on the Passenger side. Many vehicles have a visible Airbag panel. When airbags first arrived on the scene it was thought that dash covers needed to have a cut out around this panel for the airbag to deploy. Many of our older patterns have such a cutout. But many patterns do not because the panel is either close to the edge or there is no visible panel. In more recent vehicles, there is no visible panel to cut out for. The airbag literally blows through the dash and pushes everything out of the way when it deploys. We now know dash covers do not inhibit air bag deployment with or without cutouts. We see requests to eliminate the airbag cutout with older patterns because people prefer the clean look without a flap. You can request this with your order. The Airbag will deploy whether or not there is a cutout. If you don't want the cut out, send a message right away when you order so we see it before the fabric is cut at the factory - thank you.

We do not make cutouts for speakers. We feel this would defeat the purpose of the dashcover to protect the dash. Sound will travel through the dashcover material quite well so no cutout is needed. Trust us on this - leave them covered.

When possible, we make our design to include the sensor cutout within a vent cutout so the "cut" is automatic. That way you don't need to know if you have a sensor or if you need to specify you need it cut.

Typically, sensors are small and round, about 1" diameter. Sometimes they are not positioned in a vent, then a separate cut must be made. Sometimes every vehicle made for a model has a sensor - in other words it is not an option but a standard feature. Most of the time it's an option and your vehicle may or may not need to have it cut.

If the sensor is separate, we always mark it's position on the bottom side. We do not cut unless we know it is for 100% of the vehicles of that model or if you tell us you have a sensor that needs to be cut.

FYI, the cuts are so small that no edge binding is sewn there.