aus Studioauflösung kann auch per Ethernet in vorhandenes Netzwerk eingebunden werden
funktioniert - alle Arten von Videoquellen anschließbar und über Netzwerk steuerbar
die kleine Glühbirne in der ansteckbaren Leuchte ist defekt und muss getauscht werden
Artikel ist differenzbesteuert keine Mwst. ausweisbar
Verkauf als Liebhaberobjekt ohne Garantie und Rücknahme
Technische Daten :
Extron ISS 408 8 Kanal Video Audio Mischer Switcher
ISS 408
Video input
Number/signal type 8 RGBHV, RGBS, RGsB, RGBcvS, component video, S-video, composite video
Connectors 8 x 5 female BNC
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0 V to 1.0 Vp-p with no offset
Impedance 75 ohms
Horizontal frequency Autoscan 15 kHz to 100 kHz (RGB)
Vertical frequency Autoscan 50 Hz to 100 Hz
Resolution range Autoscan 720×525 to 1600×1200*
*Input resolutions above 1400×1050 are undersampled.
Video processing
Decoder 9 bit digital
Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 140 MHz standard (RGB)
Colors 16.78 million
Horizontal filtering 4 levels
Vertical filtering 8 levels
Video output
Number/signal type 2 scaled RGBHV, RGBS, 1 optional DVI
Connectors 2 x 5 BNC female, (2) 15-pin HD female
Nominal level 0.7 Vp-p for RGB
Minimum/maximum levels 0 V to 0.7 Vp-p
Impedance 75 ohms
Scaled resolutions 640×4801,3,4,6, 800×6001,3,4,6, 832×6243,4,6, 848×4803,6, 852×4803,6, 1024×7681,3,4,5,6, 1280×7681,2,3,6, 1280×8001,3,6, 1280×10241,3, 1360×7653,6, 1365×10243,6, 1366×7683,6, 1400×10501,3,6, 576p1,6, 720p3,6, 1080p3,6, 1080i1,3,6
1 = at 50 Hz, 2 = at 56 Hz, 3 = at 60 Hz, 4 = at 75 Hz, 5 = 85 Hz,
6 = locked to the refresh rate of input #1 (Accu-RATE Frame Lock™)
NOTE For output resolutions with less than 1024 pixels horizontally, the optional DVI output’s true horizontal resolution is limited to 1024 pixels. For the 1365×1024, 1080p, and 1080i output resolutions, the optional DVI output’s true horizontal resolution is limited to 1280 pixels. The DVI card outputs all other selected resolutions normally.
NOTE For the output resolutions listed below, the total pixel and active pixel values of the RGBHV outputs are reduced:
1365×1024: 1280 active pixels
1080i: 1280 active pixels
1080p: 1280 active pixels
The sync timings and line widths are correct and most displays recognize the rate correctly.
Return loss -30 dB @ 5 MHz
DC offset ±5 mV with input at 0 offset
Switching type Seamless switching (cut or dissolve)
Sync
Input type Autodetect RGBHV, RGBS, RGsB, RGBcvS, and component video
Output type RGBHV, RGBS
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
Output level 0 V to 5.0 Vp-p
Input impedance 510 ohms
Output impedance 75 ohms
Max. input voltage 5.0 Vp-p
Max. propagation delay 20 ns
Polarity Positive or negative (selectable)
Audio
Gain Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response 20 Hz to 20 kHz, ±0.05 dB
THD + Noise 0.03% @ 1 kHz at nominal level, 0 dB gain
S/N >90 dB at maximum output (unweighted)
Crosstalk <-80 dB @ 1 kHz, fully loaded
Stereo channel separation >90 dB @ 1 kHz
CMRR >75 dB @ 20 Hz to 20 kHz
Audio input
Number/signal type 8 stereo, balanced/unbalanced
Connectors (8) 3.5 mm captive screw connectors, 5 pole
Impedance >10k ohms unbalanced/balanced, DC coupled
Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level +19.5 dBu, (balanced or unbalanced) at 1%THD+N
Input gain adjustment –24 dB to +9 dB, adjustable per input
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type 2 stereo, balanced/unbalanced
Connectors (2) 3.5 mm captive screw connectors, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1 dB channel to channel
Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm) >+15 dBm, balanced or unbalanced at 1%THD+N
Control/remote — switcher
Serial control port RS-232, 9-pin female D connector
Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations 2 = Tx, 3 = Rx, 5 = GND
Ethernet control port 1 RJ-45 female connector
Ethernet data rate 10/100Base-T, half/full duplex with autodetect
Ethernet protocol ARP, ICMP (ping), IP, TCP, Telnet
Program control Extron’s control/configuration program for Windows®
Extron’s Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet
General
Power 100 VAC to 240 VAC, 50-60 Hz, 60 watts, internal
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Fan, right to left (as viewed from the front panel)
Mounting
Rack mount Yes
Enclosure type Metal
Enclosure dimensions 5.25″ H x 17.5″ W x 11.2″ D (3U high, full rack wide)
(13.3 cm H x 44.5 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight 11.2 lbs (5.1 kg)
Shipping weight 17 lbs (8 kg)
DIM weight 21 lbs
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, FCC Class B