Important: How to use this double sided tape correctly
1. Fully clean the surfaces you wish to bond, ideally with an alcohol-based product to completely remove all dirt and grease.
2. Allow time for surfaces to completely dry and applying above 10°C.
3. Press tape into position and hold pressure for 10 seconds or more, this tape requires pressure to start bonding correctly.
4. Allow to cure for at least 6 hours, remove the liner to expose the other side of adhesive.
5. Repeat cleaning process of other surface and press firmly onto tape.
Tips to improve double sided tape efficiency:
Do not attempt to remove and re-apply tape as this may cause failure.
Do not apply to dirty or greasy surfaces.
Do not apply to material or fabrics
Do not apply in conditions below 10c
Do not use with vinyl, wallpaper or finished wood surfaces.
Removal
leaves no residue or damage to the appropriate surface, it can be
removed by hand or using a little direct heat while pulling it back.