2 x Gasket Genie Blown Head Gasket & Engine Block Repair Fluid
Here
we have Gasket Genie, Using magic of sience this revolutionary product that actually repairs
broken gaskets, cracked head gaskets and repairs warped heads. Save
hundreds if not thousands on costly repairs. Gasket Genie repairs your
broken or cracked head gasket quickly and permanently. Gasket Genie is not
a temporary solution!
2 x 500ml Gasket Genie
How does Gasket Genie work?
Gasket Genie is a blend of cutting edge polymer science. It is a clean liquid
that does not contain any iron fillings, fiber glass pieces or other
types of solid additives. These could clog up and even damage an engine.
We do not use fillers.
Simply pour into your cold radiator and run the engine for around an hour.
As
the engine heats up it, the scientific blend in Gasket Genie will
penetrate cracked and or broken head gaskets and will permanently seal
the holes. The heat from the engine will start a reaction with the
Gasket Genie creating a super bond that they guarantee will last for as
long as you own the car
How to use Gasket Genie in 3 simple steps!!
1. With a cold engine, open the radiator cap and pour in Gasket Genie. Replace the radiator cap.
2.
Start the engine, then turn the heater and fan on full. Let the engine
run for 60 minutes. After 60 minutes, let the engine completely cool and
top up the radiator with coolant and water.
3. Drive your car as usual, Gasket Genie will continue to work as you are driving.
Important:
If you are putting Gasket Genie into your car through an expansion tank,
make sure that there is enough room in your cooling system for the Gasket Genie to penetrate your system otherwise the Gasket Genie will just
sit in the expansion tank.
For
optimum results:- If you have tried inferior products flush your
cooling system with water after disconnecting bottom radiator hose. Do
not use a flushing agent.
Additional Gasket Genie Directions if you are experiencing back pressure or bubbling:
These
directions are for people that have a lot of back pressure building in
the cooling system, usually shown as bubbling in the header tank or air
forcing past the coolant cap.
-
Locate the cylinder causing the bubbling in the overflow tank or
backpressure. (Remove plugs one at a time till bubbling stops.
-
Before starting the engine, remove the spark plug or injector from the
cylinder that was causing the bubbling in the overflow tank or back
pressure. If accessible, remove injector wire from that cylinder. This
will limit the amount of unburned fuel going into the combustion
chamber.
-
If you cannot find the spark plug that is missing, run the engine with
the coolant level down to the top of the radiator core and with the
radiator cap off or leave the expansion cap off the expansion bottle
with water only just visible.
-
Make sure to run the engine up to temperature with the spark plug
/Injector out and for the one final time with the spark plug/injector
back in place. Frequently asked Questions
Q) What is the background of the product?
A)
The Product was developed in Germany and has been through some very
strict testing an independent laboratory. If used properly it has a 99%
success rate.
Q) What is in Gasket Genie?
A) Gasket Genie contains a mix of proprietary chemicals that have been blended in such a way that they form a bond when heated.
Q) Will Gasket Genie block my engines cooling system?
A)
Unlike other brands, It does not use fibers or particles that
can damage or clog an engines coolling system. Our product is a clear
liquid.
Q) Can Gasket Genie be used with anti-freeze?
A) Gasket fix works well with antifreeze.
Q) How long will Gasket Genie last?
A) Gasket Genie has been designed to be a permanent fix.
Q) Are there some problems that Gasket Genie will not fix?
A)
Gasket Genie will not seal leaks in hoses, seals, water pumps, or
extremely large cracks in the head or block resulting in the vehicle not
starting. If it does not run Gasket Genie can not work as it
relies on temperature.
Q) What do I do if I have used an inferior or other product making similar claims?
A) If you have used an inferior product you must flush the radiator with water to clean it before using gasket fix.
Q) What precautions should I take with Gasket Genie?
A)
Gasket Genie should be kept out of reach of children. Avoid eye or skin
contact. If eyes or skin become irritated with Gasket Genie,
rinse with cold water immediately. If swallowed, do not induce vomiting.
Call a doctor immediately.
Q) Do I need to drain the coolant system before using Gasket Genie?
A) You need clean coolant in the system, if yours is old or full of oil you must change it first then add Gasket Genie.
Q) What if I have oil leaking ?
A) Gasket Genie will not fix oil leaks, only coolant related leaks on the head gasket.
Q) Do I need to flush the coolant if I am using Gasket Genie a second time as it initially did not work?
A) If the coolant was fresh and clean add Gasket Genie, if dirty flush it first.
BOTTLE TYPE MAY DIFFER FROM PHOTO