WITH FLOAT SWITCH

50M FIRE HOSE INCLUDED

Submersible sewage and dirty water pump, with grinder used mainly for emptying of cesspit's, septic tanks or flooded rooms,
pumping of water from lakes and ponds.

The pump is equipped with the float switch so it can be controlled automatically. The float switch works by simply turning the pump on when the water level goes up and turning it off when the level goes down.

The pump is also equipped with an iron impeller (rotor disc) which acts as a rotor. This makes it easier for the pump to remove contaminants from the liquid. The task of the rotor is to break up and pump dirt. This solution ensures that too much dirt in the network is not allowed to pass through and the pump is not clogged. 

Technical parameters:

 • Cast Iron motor body with cast iron impeller which acts as a grinder / breaker

 • Float Switch

 • Electric induction engine
 

 • Input: 220V - 240V / 50Hz

 • Max. flow : 18000 L / h

 • Max. length of suction  - 200m

 • Max. depth of suction: 11m

 • Cast Iron Hermetic casing (fully submersible)

 • Weight : 15 kg

 • Height : 44cm

 • Diameter with outlet nozzle: 28 cm

 • 3 x Connectors/ hose adapters included: 2”(52 mm), 1,5"(38 mm), 1"(25 mm)

 • Power cord length - 10m

 • Automatic external thermal protection, which protects against overheating of the motor and disconnects the pump when the turbine is blocked. After unblocking the turbine and reaching the appropriate temperature, the pump will restart automatically. Thermal protection switches off the pump when overheated however this is a submersible pump so it should be always fully submersed when it's operating.