eBay

Description

4-port PoE switch to transmit data and supply power for PoE devices, such as IP cameras, wireless AP, VoIP, etc. Standard IEEE 802.3af(15.4W) 802.3at(30W) power supply for four PoE ports.

Features:
6x10/100Mbps auto-sensing RJ45 ports, 4x10/100Mbps PoE ports, 2xUplink Ethernet port
Can supply power to network surveillance cameras that with PoE function
Supports port auto-flip (Auto MDI/ MDIX)
Adopts store-and-forward architecture
Features with fanless, natural cooling, small, compact and quiet design, suitable for desktop or wall

Specifications:
Standard: IEEE802.3af/at
Consumption: 90W
Power adapter voltage: Input AC 100V-240V
PoE switch input: DC 48V-55V
Network port: 1-4 port: 10/100Mbps PoE Ethernet Port; uplink port: 10/100Mbps Ethernet Port
Transmission Distance: 0-250m
Transmission media: Cat5/5e/6 standard network cable
PoE power consumption: af≤15.4W at≤30W
Working temperature: 0℃-55℃
Storage Temperature:-20℃-70℃
Relative humidity: 20%-95%
MTBF: >30000h
Item size: 20.2 * 14 * 4.5cm / 7.96 * 5.52 * 1.77in
Item weight: 764g / 26.97oz
Package weight: 988g / 2.18Lb
Package size: 27.2 * 17 * 6cm / 10.72 * 6.7 * 2.36in

Item Included:

PoE switch x1
AC Power Cable x1

8Port POE FEATURES
Supporting 802.3 Ethernet, 802.u Faster Ethernet；

Supports POE IEEE 802.3af/at compliant Powered Device (PD)

Modes: Normal switch mode/Extended mode(Port1-8:250Metres ultra-long transmission)

Ports 1~8 features POE power supply capability and can be used as Power over Ethernet devices；

Auto MDI/MDIX crossover for all ports

Support full duplex based on IEEE802.3x and half duplex based on Backpressure

Support non-blocking wire speed forwarding

MAC address auto-learning & auto-aging

Total POE power budget of 120 W

Just Plug and Play

Technical specification and parameter

Interface		810/100M POE ports (Data /Power) 210/100M uplink RJ45 ports (Data)
Basic function		Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging
Standards		IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control
Mode		Normal switch mode/Extend mode
Data Transfer Rate		Ethernet : 10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Ethernet :100Mbps(Half-duplex);200Mbps(Full-duplex)
Performance	Store & Forwarding	Yes
	Switching Capacity	2G
	MAC Address Table Size	2K
	Jumbo Frame	2048 byte
Environmental		Operation Temperature：0℃～40℃ Storage Temperature：-40℃～70℃
		Operation Humidity：10%～90% RH Non-condensing Storage Humidity：5%～90% RH Non-condensing
Power Input POE Standards		Single port maximum power 30W, whole switch maximum power 120W Supporting over-current, over-voltage and short-circuit protection Supporting Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36-
		AC 110~240V 50/60HZ
Cabling type		100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m)
Physical dimensions		190mm140mm43mm(W x D x H)