The CTEK CT5 Time To Go Battery Charger was developed to ensure easy charging of all common batteries.

For all batteries, whether car, motorcycle, quad, lawn tractor, etc .

  • Connect and forget, just plug it in and the battery will always be optimally cared for, even for years to come
  • The charger adjusts itself to the battery, ensuring optimal battery charging and care at all times
  • Displays the hours remaining until the battery is fully charged
  • Shows when a start attempt can be made and when the battery is 100% full

The CT 5 Time To Go, plug it in and forget it!

Save valuable life with the world's first charger that shows you the remaining charging time and the battery's readiness for use. The CT5 TIME TO GO charging and trickle charger is a world first because it answers the question "When will my battery be fully charged?"

It also shows you when you were able to try starting your vehicle for the first time, even before the battery is fully charged.

The CT5 TIME TO GO uses advanced technology and offers three charging and trickle charging programs: Normal, AGM and Recond. The device is easy to use and works fully automatically, and you can use it if necessary. Leave it connected to the battery for as long as you like without the risk of deep discharging or overcharging.

The CTEK CT5 Time To Go charger is a practical and easy-to-use battery charger with an easy-to-understand display. It does not spray sparks, is protected against reverse voltage and short circuits, and has a 5-year guarantee.

Here is a video about the CTEK CT5 Time To Go

Tutorials - CTEK CT5 Time to go - Charging - YouTube

Video will open in a new window
Using the eBay App? Paste link into a browser window:

Here is a video about the 8-stage charging process and how the CTEK devices work

CTEK 8 STAGE CHARGING PROCESS - YouTube

Video will open in a new window
Using the eBay App? Paste link into a browser window:

scope of delivery

  • CTEK CT5 Time-To-Go charger (with normal power connection - Schuko)
  • CTEK adapter charging cable M6, for permanent connection to the battery (alternative, not absolutely necessary)
  • CTEK charging cable for direct connection to the battery using “clamps”
  • operation manual

Technical details

  • Volts: 12V
  • Input: 220-240V AC, 50-60Hz
  • Charging current: 5.0A max
  • Back discharge current: less than 1.5Ah/month
  • Ambient temperature: -20°C to +50°C
  • Battery Types: All types of lead-acid batteries (WET (wet), MF (maintenance free), Ca/Ca and GEL), AGM, with 12V.
  • Battery capacity: 20 to 130Ah
  • Insulation class: IP65
  • Temperature compensation: Built-in adjustment of the charging voltage to the ambient temperature
Charger battery type Lead-acid batteries
CTEK eyelets inner diameter M6 (6.4mm)
Charger volts 12 volts
Charger battery type Gel batteries
Charger protection class IP65
Charger battery type AGM batteries
Charger battery type Lead-calcium batteries
CTEK guarantee 5 year guarantee
Charger Maximum charging current 5.0 Amps (A)
Please scroll for more information

CTEK guarantee conditions

The manufacturer CTEK gives the original buyer of this product a 5-year manufacturer's warranty. The guarantee is granted from the date of purchase by:

CTEK Sweden AB
Rostugnsvägen 3
SE-77670 Vikmanshyttan
Sweden

  • The guarantee applies throughout Europe.
  • This Limited Warranty is non-transferable.
  • The statutory warranty right (liability for defects) is not restricted by the guarantee.
  • The guarantee applies to manufacturing and material defects.
  • The guarantee is only valid within the guarantee period.

A product is defective only if the product does not conform to the applicable product specifications specified in the product's user manual or if the defect is due to defects in materials or workmanship. The guarantee becomes invalid, or does not apply for:

  • Products that have been opened (incl. a broken seal), intentionally damaged or otherwise modified or altered.
  • Products that are not from CTEK or repaired by its authorized representatives.
  • Products used in conjunction with consumables or accessories not approved in writing by or supplied by CTEK.
  • Improper use or failure to comply with the instructions for installation, commissioning, operation or maintenance (ie not in accordance with the operating and installation instructions).
  • Unauthorized modifications, changes or attempted repairs.
  • Vandalism, destruction caused by external influences and/or people/animals.
  • Failure to comply with applicable safety standards and regulations.
  • Defects caused by fire, water, snow, moisture or other liquids not specified for normal use.
  • Products whose serial number has been obscured, altered or removed.
  • any use of the product that is not in accordance with the design of the product or does not correspond to the intended use specified by CTEK.
  • any installation and/or modifications that prevent the product from being used as intended.
  • normal wear and tear and minor damage such as: B. (but not limited to) corrosion, scratches, dents, rust, stains and non-functional parts such as: B. (but not limited to) plastics and coatings.
  • Damage, errors, failures or defects caused by misuse, tampering, illegal use, negligence or overuse. Or errors otherwise caused by the customer/user.

Complaints sent directly from the end user to CTEK will not be accepted. Products sent directly to CTEK will be returned to the sender at their expense. If the warranty claim for a defective product is not recognized by CTEK, a return will only be made if this is expressly requested by the customer via the point of sale. In this case, the customer must bear the transport costs. Once the warranty period has expired, the product will be scrapped without further investigation. Or returned to the sender at their expense.

In the event of a warranty claim, the defective product must be submitted to the point of sale together with proof of purchase and a description of the defect at the customer's own expense:

MotoUnion
Manuel Hetzel
Eyachstrasse 32
72459 Albstadt

Defective products will be repaired or replaced with an equivalent product at CTEK’s expense. Defective products and those deemed irreparable will be scrapped by CTEK. No warranty other than that set forth herein is provided and in no event shall CTEK or the Seller itself be liable for any indirect failure or consequential damages. Furthermore, CTEK SWEDEN AB is not obliged to provide any guarantees other than these.

CTEK reserves the right to vary the terms and conditions stated herein without prior notice due to changes in the availability of services, products and/or spare parts or for the purpose of complying with applicable guidelines, rules, regulations and laws, to modify or change.

Please scroll for more information
Complaints sent directly from the end user to CTEK will not be accepted. Products sent directly to CTEK will be returned to the sender at their expense. If the warranty claim for a defective product is not recognized by CTEK, a return will only be made if this is expressly requested by the customer via the point of sale. In this case, the customer must bear the transport costs. Once the warranty period has expired, the product will be scrapped without further investigation. Or returned to the sender at their expense. Defective products will be repaired or replaced with an equivalent product at CTEK’s expense. Defective products and those deemed irreparable will be scrapped by CTEK. No warranty other than that set forth herein is provided and in no event shall CTEK or the Seller itse