6 in 1 Jamma Switcher

1.       Channel 1 and 5 can be configured to stay on. Only switching off the audio and video when cycling through the games.

2.       Channel 5 and 6 can be powered from the Jamma power supply or external power supply. Allowing for a different voltage range. Use the switch to choose between an external power supply or the power from the Jamma connecter.

3.       Ground lift on pins 27 and e for button 6 input.

4.       Channel 2 has stereo audio output. Pins are 10, L, 11 and M. They can be configured with 10, L your Right Ch. and 11, M your Left Ch on the Jamma harness. Any standard mono game will also work on channel 3. Use 10, L for mono on the Jamma harness.

5.       Two options to switch between games. First, a single button can be installed on your cabinet. Second, you can use a combination of the start buttons 1 and 2 or button-1 player-1 and button-2 player-1. Example: If you have Player 1 start and player 2 start selected. Push and hold player 1 start and press player 2 on and off to cycle between games.

6.       One master power connection that is in parallel with the Jamma power lines. You can connect a

 power supply directly to this connection to run the switcher and power your boards. No need to connect the Jamma harness to a power supply. It can also be used as a power out. If your Jamma harness is connected to a power supply. You can use this connector as a power source to run other boards like the RGB video converter.

 

Installing the LED number display.

The LED number display can be mounted anywhere you like. Just connect the +5 volts, Gnd, Res and Pulse from the 6 in 1 switcher to the LED display. (Wires not included)