This is IC door access system and IC support wirting number to the cards. It has been widely used at offices, factories, hotels, schools and other public places... etc.
Note:
- It supports IC only, not support ID
- IC tag is Random Color
Packing List (bulk pack):
- 1 x IC keypad (with Add/ Delete user card)
- 1 x Power supply
- 10 x IC keychain (random color)
IC Keypad Features:
- Plastic made, waterproof for outdoor (not for heavy rain or storm)
- Full programming from the keypad
- Support Fingerprint, IC Card, PIN
- Support ONE door
- Fingerprint capacity is up to 120 users
- Touchpad, with backlight
- Standalone working, and support Wiegand 26 connection
- Working voltage: DC12V
- Static current: below 100mA
- Internal Reader Frequency: IC model 13.56MHz
- Proximity Card: IC model or compatible
- Card reading distance: 3-5cm
- Storage capacity: 120 fingerprint, 120 card
- Electric lock output: Active or passive
- Door opening time: 0-99 seconds
- Size: 140 x 70 x 16mm (5.51 x 2.76 x 0.63 inch)
- Weight: 147.5g (0.33 lb)
Power Supply Features:
- Power supply switch is built-in EMI filter
- 100% full load burn-in test
- Low output ripple and noise
- Over load/over voltage/short circuit protection
- Based delay control circuit, lock time can be in 0 to 15 seconds
- Set NC/ NO output, can control various types of electric locks
- Can reduce the load of access controller, save wiring to reduce the hidden trouble
- Input voltage: AC 110V to 240V, 50Hz to 60Hz
- Output voltage: DC 12V, 3A
- Output contact: Access Control, Electric Lock, Release Button
- Time relay: 0 to 15sec
- Standard design: Steel material, Painted
- Size: 120 x 95 x 38mm (4.72 x 3.74 x 1.49 inch)
- Weight: 326g (0.72 lb)
IC Tag Features:
- Storage capacity: 8kbit (1024 x 8bit) EEPROM, 16 partitions, two passwords per partition
- Operating frequency: 13.56MHz
- Communication speed: 106K boud
- Reading and writing distance: 2.5-10cm
- Reading time: 2ms
- Writing time: 12ms
- Working temperature: -20 ° -85 °
- Number of erase cycles: > 100,000 times
- Standard: ISO 14443A
- Size: 32 x 42 x 4mm (1.26 x 1.65 x 0.16 inch)
- Weight: 4g (0.14 oz)
Exit Button Features:
- Entry/ out door access control switch
- User friendly, push for openning the door
- Compatible with most access control/ locking devices
- Current rating: DC 36V/3A
- Mechanical life: 500000 tested
- Material: Hard plastic
- Size: 85 x 85mm (3.34 x 3.34 inch)
- Weight: 54g (1.90 oz)