Packing list:

• 1 x Heating Pad

Specification:

• Name: Silicone motor pot heating pad

• Model: D98358

• Material: Silicone and Alloy

• Dimensions: 200x150mm (6"x8")

• Plug: US

• Voltage: 110v (US plug)

• Power: 300W

Features:

• It is mainly composed of nickel-chromium alloy heating wire and silicon rubber high-temperature insulating cloth. Silicone rubber heating plates are thin, lightweight and elastic. It can be in complete intimate contact with the object being heated, allowing heat to be transferred wherever it is needed, improving heat transfer during processing, accelerating heating and reducing energy requirements. Good waterproof performance, fast heating, uniform temperature, high thermal efficiency and good hardness.

• The insulating layer of the silicone rubber heating plate is composed of silicone rubber and glass fiber cloth, with high insulation performance and a breakdown voltage of 20-5050kv/mm.

• The double-sided tape on the back can be directly attached to the product to be heated. The maximum resistance is 200° and will not fall off.

Install:

• Can be bonded to smooth and smooth workpieces with pressure sensitive tape.

• The maximum working temperature of pressure sensitive adhesive is: 150°C continuous, 230°C immediate. When the power density does not exceed 0.9 p/c ㎡.

Heating:

• When using this type of electric heating device, it should be noted that the working temperature of its continuous use is lower than 240 ℃, and the instantaneous temperature does not exceed 300 ℃.

• The silicone heater can work under pressure, that is, press the auxiliary pressure plate on the heating surface. Good thermal conductivity. When the working area temperature does not exceed 240℃, its current density can reach 3w/c㎡.

• Under the condition of paste installation, the working temperature is allowed to be lower than 150℃.

• In the case of air dry burning, due to the temperature resistance of the material, the power density must be less than 1w/c; under discontinuous working conditions, the power density can reach 1.4w/c㎡.

• The working voltage is selected according to the principle of high power-high voltage, low power-low voltage, and special needs can be excluded.