PRODUCT PARAMETERS

• Product Model:Car Radio Carplay

• Voltage: 12V

• Software solution: C500

• System: WIN-CE

• Screen resolution: 800 * 480

• Type: Car MP5

• Panel Light: Seven Lights

• Screensize: 7 "Puqing

• Color Box Size: 205 * 140 * 170mm(Color Box) 

• Panel size: 178 * 101mm

• GPS Navigation Not Supported

• Number of boxes: 12

• Preinstalled aux audio input: Yes

• Host depth: 110mm

• Operating temperature: -10~ 60 degrees

• Single machine: 1103g

• Brake tip function: support

• Radio band: FM

• Bluetooth Model: Version 4.0

• Radio chip: QN 8035

• Radio frequency: 87.5 ~ 108MHz

• Amplifier chip: TDA7388

• Double screen identical: not supported

• Video output: support

• Remote control: card remote control

• TF card slot:Yes

• Supported image format: JPG

• Reset key: Yes

• Reverse image: support(camera optional)

• Button: Physical Button

• Steering wheel control function: support

• Power: 60W

• USB Interface and Version: Backside tail of the front panelUSB 2.0

• Supported audio format: MP3/WMA/WAV/APE/FLAC

• Support video format: RM/RMVB 1 AVI/MP4/MKV/3GP

• Mobile Interconnection: Support(Carplay/AndroidAUTO)

• Languages: Chinese 1 English/ Spanish/ Russian/ lalian/ German/ French/ Bulg

• Important notice before installation:
  1.Yellow line (for memory wire) connected to the battery constant current positive, the machine will have memory function.
  2.Red line pick the key to the ACC line, this line is also positive, control power switch. Black wire connected to the negative power supply.
  3.Blue line connected lift the antenna or subwoofer REM control line, if not have do not connected, wrapped up with rubberized fabric.
  4.The remaining eight wires(gray white green purple) are speaker line, a group of colors corresponding to a pair of speaker lines (positive and negative).
  5.Please pay attention to check whether the original car speaker cable if contact iron (the original car speaker wire welding to the metal, or a speaker only a line thow out, called contact iron). contact iron will cause our high-power machine without sound, please test it with a multimeter before install, if contact iron, please disconnect and then install.
   
  Friendly Reminder:
  1. Can not use the original car plug directly connected to our new machine, do not match will lead to the machine burned, part of the machine can be shared please consult customer service.
  2. If you buy a 12V voltage product do not install to 24V voltage models, otherwise it will cause the machine burned.
  3. When wiring, speaker cable and power cord together, will cause a short circuit, lead the machine burned/unable to boot or machine without sound.
  Note: This machine is 12V machine, not according to the 24V power supply

Packing:

• 1*HOST

• 1*Remote control

• 1*Power cord

• 1*Instruction