Wilckens 400 ml clear varnish spray paint high gloss

 

• Resin-based spray paint

• High gloss/semi-gloss

• Fast drying

• For outdoor and indoor use

• Very good progression

 

Description

High-quality solvent-based spray paint based on synthetic resin. Suitable for painting and repairing indoor and outdoor objects. Excellent flow for even surfaces. For perfect surface protection. This gives the painted surface lasting protection.

 

Light resistance

Lightfast.

 

Weather resistance

Weather-resistant and UV-resistant.

 

compatibility

Even after it has completely dried, do not spray over it with acrylic varnish!

 

hue

Colorless

 

Purpose of use

Excellent for all DIY and hobbyist work on wood, metal and many paintable plastics*. Particularly suitable for finishing fluorine and metallic colors.

* Only suitable for paintable plastics.

 

Paint structure and application technology

The surface must be clean, dry and free of grease. Remove loose old paint and rust, then sand (wear a dust mask). Cover the surrounding area. Shake well before use (approx. 2 minutes). The mixing ball must be clearly audible. Spray sample plate. Also shake the container from time to time while using it. Spray distance approx. 30 cm. Multiple thin coats are better than one thick coat. Wait a few minutes after each coat, but no longer than 30 minutes. Can be painted over within 2 hours or after 24 hours.

 

fertility

Approximately 2 m²/400 ml, depending on the surface.

 

Drying (at 20°C, 50% relative humidity)

Can be painted over: within 2 hours or only after 24 hours

Lower temperatures and higher humidity extend drying times.

 

Storage (+ 10°C to 25°C, relative humidity maximum 60%)

10 years if stored properly.

 

VOC content

Spray paints are not subject to the VOC decoration guidelines!

 

Danger

Extremely flammable aerosol. Container is under pressure: May burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness. Repeated exposure may cause dry or cracked skin. If medical advice is required, have packaging or label available. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Do not spray on an open flame or other source of ignition. Do not puncture or burn, even after use. Do not inhale aerosol. Protect from sunlight. Do not expose to temperatures above 50°C. Dispose of contents/container in accordance with local regulations. Without adequate ventilation formation of explosive mixtures possible. Use exclusively in accordance with the intended purpose. Contains acetone.

The surface must be clean, dry and free of grease. Remove loose old paint and rust, then sand (wear a dust mask). Cover the surrounding area. Shake well before use (approx. 2 minutes). The mixing ball must be clearly audible. Spray sample plate. Also shake the container from time to time while using it. Spray distance approx. 30 cm. Multiple thin coats are better than one thick coat. Wait a few minutes after each coat, but no longer than 30 minutes. Can be painted over within 2 hours or after 24 hours. Extremely flammable aerosol. Container is under pressure: May burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness. Repeated exposure may cause dry or cracked skin. If medical advice is required, have packaging or label available. Keep out of reach of children.