>>>Two working modes:
1. Receive WiFI (Station mode): Connect your computer to WiFi;
2. Launch WiFi (Soft AP): Create a WiFi hotspot for sharing.
Compatible with PC, desktop, laptop.
>>Widely Compatible:
UGREEN USB WiFi Adapter can support Windows 11/10/8.1/8/7, Linux 2.6.18-5.3.
Windows can be used without the driver, other systems can easily install the driver through our website or instructions of User Manual.
>>>Specifications:
Frequency Range: 5GHz+2.4GHz
Transmission Rate: AC650Mbps (5GHz: 433Mbps; 2.4GHz: 200Mbps)
Standards: IEEE802.11b,IEEE 802.11g, IEEE 802.11n, IEEE 802.11a,IEEE 802.11ac
Encryption: WPA-PSK/WPA2-PSK/64bit WEP/128bit WEP
Working Mode: Receive WiFi (Station Mode) / Launch WiFi (Soft AP)
Support System: Windows 7/8/8.1/10/11、Linux 2.6.18~5.3.
Driver: Windows system can be used without the driver, other systems can easily install the driver.
(You can use this product to connect your desktop/laptop to WiFi, or your laptop's built-in wireless WiFi adapter is damaged and want to find a low-cost replacement, you can choose this product).
Create a WiFi hotspot for sharing.
You can convert your wired computer into a wifi hotspot for other devices (like: Phone/iPad/Tablet) to use.
How to create a WIFI hotspot?
1. Search "Connectify Hotspot", "mHotspot", etc. in the browser;
2. Download and install the corresponding software.
The above data are measured by the UGREEN laboratory, the actual use will be slightly different depending on the specific circumstances.
Product Specifications
>>Important Note:
1. If your devices without optical drive,or optical drive was damaged, please download the driver from the UGREEN Offical website: https://www.ugreen.com/pages/download
2. The product transmission speed will be affected by the strength of the wireless signal.
In addition, the USB 1.1 interface will also restrict the transmission speed.
>>Troubleshooting Guide:
(1) Check if the WiFi function of the nearby router work properly when connected to the cell phone directly.
(2) Reduce distance between the USB WiFi adapter and the router for a try, and avoid the obstacles such as thick walls, metals or large-area mirrors.
(3) Check whether the wireless router and wireless AP have settings to hide the wireless network name.
(1) Check the signal strength of the router. Try to connect the WiFi in a place that has a stronger signal.
(2) Ensure you have entered the correct password.
(3) Check if the DHCP function of the router has been enabled. If not, the WiFi adapter won’t be able to obtain the IP address and connect the internet.
(4) Check if you have set the binding of your Mac address and the router. If yes, you need to set the binding of Mac address and the WiFi adapter.
(5) Ensure encryption type of your router is one of the WPA-PSK, WPA2-PSK, and 64/128-bit WEP.
(1) Try to use the WiFi adapter in a place that has a stronger signal.
(2) Manually adjust different channels for the router, and find out the optimal channel so that the interference is minimal.
(3) Set the router to 2.4Ghz from 5Ghz for a try.
(4) Check if the internet speed is normal if you connect the phone to the router's WiFi in the same circumstance.