Description
Brand: PKCELL
Model:ER14505 Li-SOCl2 Battery Nominal capacity:2400mAh
Nominal voltage:3.6V
Standard Current:1mA
Continuous Current:100mA
Pulse Current:200mA
Cut-off voltage:2V
Operating Temperature(°C):-55 to +85 degree
Weight:19G
Model Number: ER14505
Size:14.5mm diameter*50.5mm height
Self Life: 10 Years
Quantity: 30pcs
About this item
- BASIC INFO—This is not a rechargeable battery. DO NOT Charge battery. 3.6V non-rechargeable AA lithium thionyl chloride battery; 2600 mAh; wide range of temperatures -55°C to +85°C; most suitable for low power consumption devices.
- Manufacturer Direct—All of our batteries have date-code to guarantee freshness. Lithium thionyl chloride battery has a passivation characteristic. Therefore, we highly recommend customer to use the battery within 3 months to receive optimal performance. Although our battery has a 10-year shelf life (under special storage conditions), we advise customers not to store batteries for a long time due to the passivation characteristic. It is highly recommended that you purchase as many as you need.
- CAUTION! If you plugged in the battery into your device and it appears to be "dead" or “half-charged,” it is usually due to lithium battery’s voltage delay or passivation. The battery can generally restore itself after it is started. If it doesn’t, please contact us immediately for free replacement. If you are not sure whether this is the right type of battery for you, please contact us with your device information so we can find you the correct battery.
What if your battery doesn't work when connected to the device?
1. Test the OCV(Open Circuit Voltage). You can use the multi-meter to test the voltage. Standard voltage should be no less than 3.6V. If your battery is lower than 3.6V, please tell us.
2. Test loading voltage. The loading voltage should be around 3.2V. If your loading voltage is higher than 3.2V, the battery is in good condition. Due to the passivation characteristic of lithium thionyl chloride, your loading voltage may not reach 3.2V immediately. You can connect the battery with a resistor and activate it with a multimeter. When the loading voltage of the battery reaches 3.2V, then the activation is successful and the battery can be used.
3. If the battery fails to activate or is still unusable after activation, please write an e-mail to us for help.
1. Test the OCV(Open Circuit Voltage). You can use the multi-meter to test the voltage. Standard voltage should be no less than 3.6V. If your battery is lower than 3.6V, please tell us.
2. Test loading voltage. The loading voltage should be around 3.2V. If your loading voltage is higher than 3.2V, the battery is in good condition. Due to the passivation characteristic of lithium thionyl chloride, your loading voltage may not reach 3.2V immediately. You can connect the battery with a resistor and activate it with a multimeter. When the loading voltage of the battery reaches 3.2V, then the activation is successful and the battery can be used.
3. If the battery fails to activate or is still unusable after activation, please write an e-mail to us for help.
