Triax iO-Link 2 Way RF Out Replicator
Restores RF Output on Sky+HD & Sky HD Receivers with No RF Output
**********************************************************************
This is the BEST QUALITY IO Link available as it has two RF Outputs one for the MAIN TV and one for a secondary TV to which you can connect a Sky Magic Eye if required.
With the IO Links with one output it means the TV signal either has to be split prior to connecting to the IO link or after if you want to have signal on both the main and secondary TV as the Triax IO Link has two outputs it makes it simple and reliable to connect.
Sky IO LINK for Sky+HD and Sky HD Receivers
The IO-LINK creates a TV-LINK enabled RF Output for SKY+HD and Sky HD receivers with no RF2 output.
Once installed the IO-LINK can be connected to an in home distribution system for viewing on multiple TV's around the house.
Specifically designed for use with the TV-Link (MagicEye) products which allow you to watch and control your Sky Receiver from another TV in the house.
Before Installing your IO Link
Ensure you have a coaxial cable linking bewteen your SKY+HD box and your second TV.
Installing your IO Link
Switch off your Sky HD/Sky+ HD receiver and disconnect the mains plug.
Connect the IO Link directly to the IO port located on the back of your Sky HD/Sky+ HD receiver.
Connect one end of the coaxial cable (Female connector) to the RF output 2 of the IO Link and the other (Male connector) to your second TV.
Connect your aerial feed to the RF in connector of the IO Link if digital Freeview reception required.
Perform either a auto or manual scan on your second TV as per your TV's instructions to find your Sky HD/Sky+HD output channel (Default Channel 68)
Press the SERVICES button on your Sky Remote Control.
Press the right arrow button on your Sky remote control (SETTINGS).
Press the down arrow button on your Sky remote control to highlight (PICTURE).
Press 0 then 1 then the SELECT button and SETUP will be highlighted.
Press the right arrow button 3 times to highlight RF OUT.
Press the down arrow button and use the number buttons to change the channel number currently showing as channel 68 (Default Setting), choose a channel between 21 & 69, the most common being 21, 26, 47, 69.
Press the down arrow button and use the right arrow button to change the RF Outlet Power setting from OFF to ON.
**********************************************************************
Specs:
** Connect to a TV distribution system for viewing and IR control from multiple rooms **
** Terrestrial Loop-Through Built In **
** DC Input to power TV Link amplifiers via TV Link Power Supply **
** Compact and attractive design for discreet installation **
Characteristics:
** Return Path: YES **
** Screened: YES **
Frequency:
** Frequency Range - 47Mhz to 862Mhz **
Gain:
** Gain - 5db Typical (RF Input - RF Output) **
Operational:
** DC Operating Voltage 12VDC **
** Power Supply adapter Part Number: 370418 **
Connectors:
** I/O Connector 10 Pin mini DIN plug 250mm lead **
** Number of outputs: 2 x RF **
** RF Connector - Input IEC ( Female) **
** RF Connector - Output IEC (Male) x 2 **
** Number of inputs - 1 x RF , 1 x I/O **
Mechanical:
** Weight (kg): 0.085kg **
** Length (mm): 66mm **
** Width (mm): 60mm **
** Height (mm): 22mm **
**********************************************************************
This IO Link has had very little use and works perfectly
**********************************************************************
COLLECTION IN PERSON IS WELCOME BUT BY APPOINTMENT ONLY.
PLEASE CALL IN ADVANCE OF YOUR VISIT TO ORGANISE
All items ordered incorrectly or in error then we would ask to buyer to pay the return carriage charge.