Description
JAMES TYLER Made in Japan Studio Elite HD Tobacco Sunburst/Black Headstock/Gold Hardware [SN.J24037]
Studio Elite HD with mid-boost and neck finish of "Tobacco Sunburst/Semi-Glossy"! !
This one has a flat and wide-ranging Mamuyo material selected for the body wood, and a hard-looking top-quality flame maple top for the body top. The wonderful quarterson (straight grain) maple neck, which is as good as USA grade, uses wood that has been processed and adjusted to suit the Japanese climate. East Indian rosewood is used for the fingerboard.
The "Extra Thin 59" neck shape, which has excellent playability, is made using a jig measured from a USA product. The hand-shaped neck is just like JAMES TYLER's grip. The fingerboard side has a smooth scalloped edge treatment, the fingerboard radius is 11R, and the frets use Jascar #57110 jumbo. The body and neck joints are heel-cut, so all players will be able to play in a high position without stress. The finish of the neck grip is the same tobacco sunburst semi-gloss finish as the body top.
The vibration of the body and neck is amazing, with a clear and quick response. You can clearly experience that the body and neck amplify Tyler's unique sparkling sound.
The bridge is based on Gotoh's T-block model and is equipped with a "G2TS" press saddle with "JAMES TYLER" stamped on it. This is a golden set of a press saddle that creates vintage-like overtones, with a T-block that ensures tuning stability and a body that enables smooth arming with two-point support. The nut uses smooth black task, and the pegs are equipped with Hip Shot locking pegs, which not only improves tuning stability, but also allows for instant string replacement in case of problems such as broken strings. The T-block bridge with deep lock pegs and string holes reduces string tension, and the exquisite string tension creates improved playability and long sustain.
The installed pickup is James Tyler Original's SSH specification. The neck and middle pickups are the ``JTS 5500,'' which has the same power and clear sound as a humbucker, and the bridge is equipped with the high-power pickup ``JTH Super.'' A combination of sharp single and powerful humbuckers. Thanks to the slant mount, compared to a typical electric guitar, the treble strings are brighter and clearer, and the bass strings are thicker and have a more bottom-filled Tyler sound! !
Switches, pots, jacks, wiring materials, etc. use the same materials as the original USA parts. The volume pot is equipped with a high-pass capacitor with the same value as the USA, so the sound is clear and clear even when the volume is turned down. When controlling the volume after distorting to distortion class, the audible sensation is as if you were controlling the gain, starting from zero volume and gradually changing from clean to crunch to overdrive/rhythm tone to distortion/lead tone. .
In the middle and bridge mix positions of the 5-way lever switch, it is possible to output a half sound with an auto-tap single coil where the bridge PU automatically switches to single.
The HD model with mid boost is equipped with a master tone, which allows you to intuitively cut high cuts, as well as adjust the tone balance of single coils and humbuckers.
Mid boost can be turned on and off with a push switch (off when pushed in). It can also be used to create a fat sound with added mid-low range, or to extend sustain in lead play. By using it in conjunction with the volume control, you can create a variety of sound effects. By operating the mid boost and tone controls for the clean sound of the front single, it is possible to create a sound similar to that of a front humbucker.
When the circuit is ON, the output increases slightly even when the boost amount is zero. Furthermore, the compression feeling that the range has been expanded by passing through the active circuit is also an essential part of Tyler's sound. If the battery runs out, you can bypass the circuit and use it normally (passive state).
The attention to detail and quality is so faithful to the original guitar that it's hard to believe it's a domestic custom guitar. Don't miss out on the guitar brand "JAMES TYLER GUITARS JAPAN," which you will feel comfortable with when you pick it up, and which we recommend as a long-term partner! !
〇What is James Tyler Guitars Japan?
``James Tyler Guitars Japan'' started when Mr. James Tyler proposed that he would like to produce JTG guitars that utilize his ideas as a guitar designer using Japan's excellent technology.
For production, we first obtained highly accurate 3D CAD data, which is the heart of James Tyler's guitar design. Based on that data, we decided to combine it with Asuka, who has excellent technical capabilities. After making several prototypes with great attention to detail and repeating trial and error, we went to the JAMES TYLER GUITARS Factory in LA for a final check. Will James Tyler go this EXTREME? It's perfect! The quality is as good as it gets. Since its release, new products have been manufactured using the same process, and James Tyler Guitars Japan is a guitar that we can confidently recommend to all guitar players.
■SKB Hard Case with Japan original logo, spec sheet, etc. included
■SPEC
Body: Flame Maple Top with Natural Binding/Mamywo Back
Neck: Quartersawn Maple/EX-THIN 59-Shape with Tobacco Sunburst/Semi-Glossy
Fingerboard: Slab Lam East Indian Rosewood/ 11Radius
Fretsd: 22F/ Jascar #57110
Tuners: Hip Shot Locking
PU: (N&M) JTS 5500/(B) JTH Super
Bridge: G2TS
Control: 5-way Lever PU Selector/ Master Volume/ Master Tone/ Mid Boost Control/ Mid Boost Bypass SW
Finish : Urethane
Payment
Please pay within 4 days after purchase.
Shipping
Please refer to Shipping and handling.
About other area, please ask me.
Returns
Returns are accepted ONLY if the item was not the item described.
International Buyers - Please Note:
* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
* Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.