NEW 2023 Twin Fan Model, featuring vari-power! A unique adjustable voltage power adapter, resulting in lower running costs, less noise and increased efficiency.
Listing is for 4.7 x 2 x 1.65m - BLUE
Please contact us for custom size and colour requests
LAST ONE IN STOCK, READY FOR SHIPPING
Our air chambers will keep whatever you put inside, clean, away from insects and isolate from the elements, leaving the contents just as you leave them. Through winter, condensation will be the number 1 harmful factor to any car, storing your vehicle within an air chamber will prevent condensation from developing and causing damage. Through summer, bugs and dust will be kept away. The wall of air and PVC will prevent from accidental knocks and brushing against the paintwork.
Look beyond just polishing and protecting your paintwork, ceramic coatings and carnauba waxes will help your paintwork but what about everything else?
The Car Bubble protects every inch of your vehicle with ease, not only is the outside protected but also the interior, undercarriage and engine bay! You cannot get better protection than a Car Bubble. Condensation will be a thing of the past, rubber parts will have a prolonged life, and metal surfaces will not corrode or tarnish. There is simply no better way to protect your vehicle all year round. The Car Bubble was exclusively developed after experiencing other air chambers on the market and wanting to provide a product with thicker, stronger materials, functionality improvements and cheaper lifetime operation costs and all while ensuring our prices are the best in the market. Read on to find out why the Car Bubble deserves to protect your car.
What you get;
This listing is for a black base, featuring blue skirting and roof.
- Dimensions = 4.7m Long x 2.0m Wide x 1.65m Height (Bubble does inflate and bulge larger, approx. 20cm extra in total width around waist height, 10cm length and 20cm peak height)
- Roof section is 20% smaller so bubble sides taper in for a nicer appearance.
- 4 tie down points to the base and 4 hanging points to the top cover, 1 on each corner.
- A heavy duty zip to all 4 sides of the base mat, allowing full removal of top cover, some air chambers only allow you to unzip 3 sides, not ours.
- A removable velcro air vent patch to aid drying of wet vehicle.
- 2 removable 12v 10w fans, each with filter and protective guard. The removable fan units allow you to remove the fan when fitting/removing the top cover to prevent damaging vehicle, this is a key feature to any air chamber.
- 240v 5amp variable voltage adapter with detachable 3 pin kettle lead fitted with a UK socket. The variable voltage allows you to control the fan speed and power usage, allowing for fast inflation by using maximum voltage, once inflated, turn down to balance fan speed and bubble pressure. Save money on energy bills when compared to other air chambers.
- PVC repair kit
- Lifetime Warranty - Register by sending or sharing a picture by email / Social Media using #CarBubbleUK @CarBubbleUK
ENSURE YOU MEASURE YOUR CAR BEFORE PURCHASING
or simply ask us to double check.
No returns for driven on or customised Car Bubbles!
Our air chambers are designed to provide a constant flow of air around the vehicle, this prevents anything from settling on the surfaces of the vehicle inside. All chambers feature a .6mm heavy duty PVC coated tarpaulin base which is 100% waterproof, fuel and fire resistant and allows a vehicle to be stored on it for long periods of time, even on surfaces which may be moist/damp/porous. Normal bases tend to wear after being driven on and off as well as absorbing moisture, these chambers do not. You can perform oil and fuel system changes and easily capture spills without destroying your floor or the base mat itself.
The clear mid-section is PVC, allowing you to view your vehicle while offering unrivalled protection, inflated or deflated.
The lightweight nylon top provides shelter and prevents scratching when laid on the car during the inflating and collapsing process.
Heavy duty nylon zip with coated pull and pull string.
The strong double and triple stitching throughout also allows the cover to breath, this allows air to constantly be exchanged, keeping the air flow continuous, this is essential to preventing moisture developing.
There is also a vent which can be opened to allow faster drying of a wet car.
The chamber is inflated by means of 2 12v 10w fans which feature a removable charcoal dust filter and guard to both sides. The power can easily be disconnected from 1 fan to allow just 1 fan to run and is sufficient enough to keep a constant air flow inside, this reduces the running costs when compared to having a twin fan setup but running both fans is optimal in moist environments.
The fans are powered by a 240v variable power adapter.
Car Bubbles smaller than 4.7m in length are equipped with just 1 fan.
We developed the Car Bubble from experience of using other Air Chambers over the last 15 years! We wanted a product that lasted longer and was cheaper to maintain and run.
Unzip top cover from all 4 sides:
We allow the top cover to be totally detached from the base, enabling safer storage and not having be left as a trip hazard on the floor. Some air chambers only unzip from 3 sides, meaning the top cover has to be left on the floor which can result in picking up dirt and grit.
Replaceable, washable and cost effective filter:
We found that the filters on our other brand air chambers were expensive to replace and deteriorated after a number of years. We have a single filter which does a perfect job and can be replaced and purchased in a sheet form for less than a pint of beer.
Detachable fan/s:
Our fan detaches, leaving no risk or denting or scratching your car once removed. Most chambers do not allow the removal of fan units.
Replaceable fan:
Our fan is easily replaced with no complex surrounds or wiring.
Thicker base:
We are the only air chamber to feature a .6mm base. This ensures a long life and resistance against tears, rips from stones pushing through. Most use .4mm base material.
Variable AC Adapter:
We use a variable AC adapter which allows you to control the speed of your fans, this allows you to inflate at full speed and then reduce speed to reduce noise and save on energy bills. In warmer months, fan speed can be reduced, in colder months, fan speed can be increased.
Coated Zip:
The Car Bubble uses a nylon zip which features a coated zip pull to ensure moisture, dirt and age does not jam the zip.
Support:
We are here to help, we understand the need for the Car Bubble and treat your car as our own. We offer an unrivalled warranty and strongly believe our Air Chamber is the best.
Looking for a customised Air Chamber?
Air chambers can be made to order and can be made in multiple colours, any size and company or car logo branding. Additional costs may be charged but please contact us for a quote.
Please measure your car before ordering, we can make ANY size, just ask! We want the Car Bubble to be your best investment in the preservation of your vehicle.
There are no returns for custom orders!
If you do not want a PVC base, the same lightweight nylon used for the roof can be used for the base. This is fine for carpeted and smooth floors in climate-controlled environments such as showrooms.
PLEASE ENSURE YOU MEASURE YOUR CAR BEFORE ORDERING, ALLOW A MINIMUM OF 1 FT BETWEEN CAR AND CAR BUBBLE MEASUREMENT.
If not in stock or for ANY custom order, there is a turn around time of up to 4 weeks but we try our best to have your Car Bubble with you within 3 weeks in the busiest of times.
All Car Bubbles comes in a nylon pull cord storage bag, this is shipped in a cardboard box. Item box size 50x40x40cm - Weight 12KG
Car Bubble UK
Q. If I put my car away wet, what will happen?
A. The Car Bubble is an evaporative system. The constant air cycle will evaporate any moisture in a matter of hours. This will prevent rust from the exterior parts while eliminating mould and mildew from the interior.
Q. Should I leave the windows up or down inside the Car Bubble?
A. You should leave the windows either down all the way or at least half the way down. If you have a convertible the top should be put up so that it will not trap moisture in the compartment it is stored in. This will let the air circulate throughout the interior keeping it dry and odour free.
Q. How much room does the Car Bubble take up?
A. Once inflated the Car Bubble takes up an additional 1 foot all around.
Q. What happens if I get a hole in it?
A. The upper shroud is made of .4 mm PVC. If you do happen to puncture the unit, use a piece of clear 100% PVC tape. This will bond to the upper shroud and will not come off.
Q. What if the power goes out?
A. The cover will deflate and turn into a regular car cover. When the power returns it will re-inflate in a matter of minutes. Make sure the fan is not facing flat otherwise it will not inflate.
Q. If you are bringing in the air from the outside you are also bringing in the humidity from the outside. How does the vehicle stay dry?
A. The Car Bubble does not eliminate humidity it eliminates condensation. The fan exchanges the air by volume 3-4 times an hour. This constant air change and air flow does not allow hot air and cold masses to meet. This in turn eliminates condensation and keeps the vehicle completely dry no matter what the temperature or humidity level.
Q. Can the Car Bubble be used for short-term storage?
A. The Car Bubble can be used for short-term, long-term or anything in between. It takes about the same time to use as a regular car cover except for the inflating of the unit. It takes a few minutes to get the car out.
Q. Do you have to drain the fuel tank or any other fluids before you put the vehicle away?
A. No, the base mat is resistant to gas, diesel, oil or antifreeze. You do not have to worry about these odours because the air is constantly changing.
Q. Do you have to use any dry packs or chemicals to keep the vehicle dry?
A. No, dry packs or chemicals are not needed. This is an evaporative system that uses air flow to prevent condensation. This enables you to take your vehicle in and out anytime you want without having to mess with chemicals or dry packs.
Q. Will the Car Bubble protect my vehicle from pests?
A. Yes, there are no gaps or holes for any type of rodent or bug to enter.
Q. How long will the Car Bubble last?
A. They should last a lifetime if looked after. The fans have a rated run time of 3-5 years depending on conditions and are easily swapped if need be.
Q. Does the Car Bubble fan have to remain on?
A. If you want the Car Bubble to remain inflated, yes.
Q. Is there a warranty?
A. All Car Bubbles come with a 1 year warranty on workmanship and lifetime on hardware, this covers the fan and power supply. Register warranty by simply sending / sharing on social media with #CarBubbleUK, a picture of your car inside the Car Bubble!
Q. Can I use this outdoors?
A. No, this is indoor only, we have an outdoor version sold separately.
Available for global shipping
If you love your car, you will love a Car Bubble