EuroLub 2 x 5 l rope grease TW cavity sealer
Product features
Rope grease TW is a temporary corrosion protection agent for metallic surfaces (small metal parts) and for vehicle cavity preservation.
Application
Rope grease TW contains a solvent. After the solvent has evaporated, a thin, non-slip film is formed on the surfaces. Low viscosity for easy processing or application. When used correctly, the preserved surfaces are reliably protected against corrosion. Rope grease TW can be applied to cleaned metal surfaces at normal temperatures by spraying, dipping or brushing. A favorable processing temperature for surface application is around 25 to 35 °C. The preservative film forms after 2 to 8 hours if there is sufficient air movement. The temperature of the surface of the workpiece to be treated must be at least 3 °C above the dew point.
storage
In the closed original container at a maximum of +30 °C. If stored below +10 °C, warm to 30 °C and homogenize before use.
Technical data
|
characteristics
|
Unit
|
|
Density at 15°C
|
0.86g/ml
|
|
Viscosity (flow time at 25°C, #4)
|
> 40 s
|
|
Dropping point (Ubbelohde), (solid mass) din 51801, part 2
|
> 80°C
|
|
Solids content
|
50%
|
|
Aromatic content in the solvent
|
<0.1%
|
|
Layer thickness
|
80 - 100 μm
|
|
Order quantity
|
285gsm
|
|
Labelling
|
See current SDB
|
The data provided may be subject to change. Observe the manufacturer's operating instructions. Data changes due to further development of the product and production remain reserved. This information is intended to describe the product and therefore does not have the meaning of guaranteeing specific properties. No liability can be derived from this.
Rope grease TW contains a solvent. After the solvent has evaporated, a thin, non-slip film is formed on the surfaces. Low viscosity for easy processing or application. When used correctly, the preserved surfaces are reliably protected against corrosion. Rope grease TW can be applied to cleaned metal surfaces at normal temperatures by spraying, dipping or brushing. A favorable processing temperature for surface application is around 25 to 35 °C. The preservative film forms after 2 to 8 hours if there is sufficient air movement. The temperature of the surface of the workpiece to be treated must be at least 3 °C above the dew point. The data provided may be subject to change. Observe the manufacturer's operating instructions. Data changes due to further development of the product and producti
Rope grease TW contains a solvent. After the solvent has evaporated, a thin, non-slip film is formed on the surfaces. Low viscosity for easy processing or application. When used correctly, the preserved surfaces are reliably protected against corrosion. Rope grease TW can be applied to cleaned metal surfaces at normal temperatures by spraying, dipping or brushing. A favorable processing temperature for surface application is around 25 to 35 °C. The preservative film forms after 2 to 8 hours if there is sufficient air movement. The temperature of the surface of the workpiece to be treated must be at least 3 °C above the dew point. The data provided may be subject to change. Observe the manufacturer's operating instructions. Data changes due to further development of the product and producti
Rope grease TW contains a solvent. After the solvent has evaporated, a thin, non-slip film is formed on the surfaces. Low viscosity for easy processing or application. When used correctly, the preserved surfaces are reliably protected against corrosion. Rope grease TW can be applied to cleaned metal surfaces at normal temperatures by spraying, dipping or brushing. A favorable processing temperature for surface application is around 25 to 35 °C. The preservative film forms after 2 to 8 hours if there is sufficient air movement. The temperature of the surface of the workpiece to be treated must be at least 3 °C above the dew point. The data provided may be subject to change. Observe the manufacturer's operating instructions. Data changes due to further development of the product and producti