A pair of used but very little use JL Audio W3v3 6.5-inch Subwoofer Driver (150 W, 8ohm
These are extremely high quality subwoofers. Being 8ohm allows you to wire them up together (in parallel) to make 4ohm. Effectively having a 12” 4ohm sub but the ability to mount them in confined spaces
I’ve shown in one of the pics the effects of parallel wiring. It allows 2 8ohm subs to be wired up to a single 4ohm amp. They act as 1 speaker.
If you need a small-format subwoofer that really delivers in extremely small enclosures, this is where your search ends. The 6W3v3 is a true subwoofer, through-and-through. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.35 in. (8.9 mm) one-way linear excursion.
The 6W3v3-8 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a tiny 0.15 cu. ft. (4.2 l) sealed enclosure, or a 0.25 cu. ft. (7.1 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
JL Audio 6W3v3 JL Audio designed their W3v3 subwoofers to deliver powerful, accurate bass with a medium-power amplifier. Clearly the best sounding 6W3's yet, these subwoofers feature DMA-optimized, long linear excursion capability to minimize distortion and increase output.JL Audio 6W3v3's are superb performers in compact sealed or ported enclosures.
Multiple patented technologies enhance performance and reliability. As with JL Audio's flagship drivers, development was guided by JL Audio's proprietary DMA (Dynamic Motor Analysis) modeling system to deliver outstanding dynamic stability and low-distortion operation within their intended power envelope.
A mineral-filled polypropylene upper cone body with a metallic JL Audio logo medallion provides a classy new look, while a removable (and customizable) mounting flange trim ring receives grille-mesh inserts directly, without the need for additional grille hardware. (Grille mesh inserts are sold separately.)
6.5" subwoofer
RMS Watts - 150 W
Recommended RMS Amplifier Power - 50 - 150 W
Nominal Impedance - 8Ω
Mineral-filled polypropylene cone
Nitrile-butylene rubber surround
Frequency response: 30-300 Hz
Sensitivity: 80.49 dB
Top-mount depth: 4-3/16"
Sealed box volume: 01005 cubic feet
Table_Image
Nominal Diameter - 6.5 in / 165 mm
Overall Diameter (A) - 6.85 in / 174 mm
Mounting Hole Diameter (B) - 5.5 in / 140 mm
Bolt Hole Circle (C) - 6.125 in / 156 mm
Magnet Diameter (D) - 4.25 in / 108 mm
Mounting Depth (E) - 4.25 in / 108 mm
These are nearly £300 each to buy so don’t miss out!
Thanks