Installation: Our stickers can be installed on any smooth flat surface, including: Glass, Metal, Painted Surfaces, Fiberglass, Plastic and more... We will provide instructions for easy installation.
Installation Instructions…
1: Once you have selected the location for your decal clean the surface with glass cleaner. Make sure the surface is completely dry before you apply the decal or it will not stick properly.
Tip for getting the perfect positioning of your sticker. Try putting a piece of masking tape along one side or the top once it’s in the desired location to hold it into place. Then use it as a hinge and lift the decal up to pull the backing off. Now just lay the decal down onto the surface, and rub on.
2: Slowly peel the clear transfer tape from the backing material. The transfer tape lifts your design off the wax paper. If some of the design is sticking to the wax paper you can lay the transfer tape back down and press on the part that’s not sticking. It can get a little tricky sticking the decal on without getting air bubbles so take your time. Place one side of the decal on the selected location, use your fingers to gradually stick the remaining decal onto the surface. After you have placed the design use a credit card or driver’s license to press the decal onto the surface. If you get air bubbles you can poke tinny holes in the vinyl and press the air out. Now you can slowly remove the clear transfer tape. If parts of the design don’t stick lay the transfer tape back down and press on the part not sticking.
3: If you live in an area that gets cold be careful when you scrap the ice from your windows. You will scrap the decal right off.
|