Copper Rivets
2 Part solid copper rivets are held firmly together by forcing the washer over the slightly thicker stem which has a chamfered end - position the washer on the stem and with the setting tool and a mallet knock the washer down the stem until it is in position - any extra stem is removed by pincers and any burrs are ironed out by using the concaved part of the setting tool.
Please refer to the below sizing chart for Rivet sizes and amounts per pack.
Sizing Chart Below
Size |
8 |
9 |
10 |
12 |
14 |
Head
Diameter |
13mm |
12mm |
11mm |
10mm |
08mm |
Under Head
Diameter |
4.6mm |
4.1mm |
3.8mm |
3.2mm |
2.6mm |
Width of
Shaft |
4.4mm |
3.9mm |
3.6mm |
3.3mm |
2.3mm |
Length of
Shaft |
19mm |
19mm |
19mm |
19mm |
19mm |
No. Of Rivets & Burrs per Handy
Pack |
18 |
23 |
27 |
34 |
60 |
Setting Tool to be
Used |
8 |
9 |
10 |
12 |
14 |