island breeze louvres
TINTED
GLASS LOUVRES
made to Australian Standards

CUSTOM CUT TO FIT YOUR WINDOW

These quality float glass blades are 150x5mm
*The maximum length available is 305mm
*Maximum reveal width of 347mm (allowing for galleries+glass)

All blades have bevelled edges

contact us with your postcode for the best price

MINIMUM PURCHASE IS 3 PIECES
or additional postage costs may apply

    WHY PAY 100's or 1000's FOR LOUVRE WINDOWS
 
          CREATE VENTILATION

    BE MORE ENERGY EFFICIENT

        EASY TO INSTALL

  REPLACE OLD OR CREATE NEW WINDOWS

 ENCLOSE VERANDAS, VENTILATE SHEDS AND GARAGES, MAKE A GREENHOUSE

MAKE WINDOWS ANY WIDTH

WE CUSTOM CUT THE GLASS TO SUIT YOUR WINDOW
                     


WE ALSO SELL
 ALUMINIUM LOUVRE GALLERIES THAT HOLD THESE GLASS LOUVRES

Please go to our store for more options

                LOUVRE FRAME HEIGHTS TABLES

Island Breeze Louvres
150mm Heights        
                                  
 
Number of louvres
Height in mm
      3
     440
      4
     580
      5 
     720
      6
     860
      7
    1000 
      8
    1140
      9
    1280
     10
    1420
     11
    1560
     12
    1700
 
Louvre frames can be stacked to achieve greater heights:  1840mm 1980mm 2120mm 2260mm 2400mm
Each additional 150mm louvre adds 140mm to the height.

  
     Island Breeze Louvres
100mm Heights

   Number of Louvres
     Height in mm
3
290
4
380
5
470
6
560
 7
 650
 8
 740
 9
 830
 10
 920
 11
 1010
 12
 1100
 13
 1190
 14
 1280

 
     
Each additional 100mm louvre adds 90mm to the height.


Please contact us for help with purchasing

ISLAND BREEZE LOUVRES

A BREEZE TO INSTALL


Blade Width Calculation & Installation Guide

Blade width calculation

Calculating your louvre blade width is easy.

1. Measure from the inside of one window reveal to the other.
2. Minus 42mm from this measurement to find the exact width of your louvre blades (see diagram below)

Blade Sizes: 150 x 5mm and 100 x 5mm

Buy-Online-150mm-01

ig-1
Installation Guide

1. Before screwing your louvre galleries to your window reveals, ensure that the frame is completely square. This will ensure proper operation of the mechanism and no tapering gaps between the louvre blades.

2. Screw the galleries to your reveal ensuring each side is exactly parrallel to the other. Given the reveal is ?Plumb? on all sides, this can be done by marking a guideline down each window jamb at an equal distance from the edge of the jamb.

3. To make blade insertion easier spray the ends of the glass with soapy water.

4. Ease back the ends of the plastic retaining clips and slide your louvre blades in from the inside. Start from the top and work your way down for safety on a large window.

5. If you are installing a weather stop bead top and bottom for the blade to close against: First lock the blades shut then postion the beads. They should be close to, but not pushing against the blades. At the bottom run a bead of sealant under the stop bead prior to fixing for a better seal.