This is an Xcut 4cm 'Concha' border punch
Base guidelines, to aid alignment of design
Punches out the design shown in the middle of the punch
The extra part of the design shown either side of the middle, is for lining up the design with holes already punched
Will cut paper, card stock, thin foam, vellum and more
Combine with other items for postal savings.
Despite the manufacturers advice of using a minimum of 90gsm paper, for the more intricate designs we recommend a minimum paper weight of 120gsm and a maximum of 260gsm, or with the simple designs such as circles, stars and squares, etc. you can use a maximum of 300gsm.Subject to the individual characteristics of each design, using less than 120gsm is likely to jam the punch, or result in an incomplete cut, so if you do need to cut thin paper, such as 80gsm or similar, or even tissue paper, or crepe, then it can be achieved by making the thin paper the content of a sandwich of 3 sheets, with an 80gsm sheet either side if it.
This will total around 180gsm and that will cut cleanly, even with (subject to the intricacy) up to 6 sheets of tissue in the sandwich making a total of just under 300gsm, subject to the quality (weight) of the tissue paper.
Feedback
Our feedback
is automated to respond to feedback received, so every time we receive a
positive feedback you will receive an immediate positive feedback to add to
your score. If no feedback is received, none will be given. If you feel that you wish to leave a negative or neutral feedback, please contact us first as we can usually resolve any issues to your satisfaction. There is no automated feedback to non positive feedback.