for PROFESSIONALs SRS ASSIST RESISTANCE EMULATOR 0.0 - 11.9Ω
DESCRIPTION
You are purchasing 1 x SRS ASSIST RESISTANCE EMULATOR 0.0 - 11.9 Ω ONLY.
FREE PACKET of 110 x Mixed .25w (1/4w) Resistors & cleaning cloth included, all resistance values are written on the strips and also quantities & resistance values are listed below:
Multiple items in pictures are for info only (Multi-meter not included).
- 10 x 1.0 OHMS:
- 10 x 1.5 OHMS:
- 10 x 1.8 OHMS:
- 10 x 2.2 OHMS:
- 10 x 2.7 OHMS:
- 10 x 3.0 OHMS:
- 10 x 3.3 OHMS:
- 10 x 3.9 OHMS:
- 10 x 4.7 OHMS:
- 10 x 5.6 OHMS:
- 10 x 6.8 OHMS:
Multiple items in pictures are for info only (Multi-meter not included).
These units are Quality British Hand built in the UK, they are NOT mass produced, thus we check every step of the assembly process. Every unit is unique (appearance may differ slightly from pictures).
If you wish to purchase items from more than one listing, then please add to basket / at checkout Don't pay, just ask seller for invoice and we will amend the postage charges accordingly, see terms & conditions Below.
SPECIFICATIONS:
We have designed the X1 Ω selector knob to rotate continuously 360° clockwise or anticlockwise 0 - 0 Ω this way you can select any resistance easier. The X.1 Ω knob rotates 270° 0 - 0.9 Ω.
This emulator was designed originally for srs / airbag diagnostics, but has also proven very useful in other fault finding procedures. This emulator will enable you to simulate over 100 different resistances including "0" ohms, any of these resistances can be selected by turning the selector knobs to the required test resistance.
NOTE:
If the yellow pin wires are lengthened then the resistance tolerance will change, please remember this if you decide to check the srs assist unit using a good quality ohms meter, make sure your meter ZERO's, do not use the meter probe leads, just plug in the 2 leads directly from the srs assist unit into your ohms meter as the leads on your meter have a resistance, this means you will not read the srs assist units true readings.
We designed & built this item, as there was nothing like it on the market. Developed to assist you in SRS / AIRBAG diagnostics. These emulators will save you time and money, every time you use them, Please see general info video's below.
You can also simulate different resistances inc a short circuit, no need to disconnect emulator, just turn both knobs to “0” ohms. You can also watch the ohms live data on your compatible diagnostic scanner change, whilst increasing / decreasing the resistance, proving the wiring and the SRS ECU are OK.
SIMPLE TO USE:
Emulator resistance is easily adjustable, the left control knob goes up 1 ohm per click and the right hand knob goes up in 0.1 ohm per click giving you a total of over 100 different resistance's between 0 ohms and 11.9 ohms. So for example say you wanted to test at 6.8 ohms simply turn the left hand knob to position 6 and the right hand knob to position 8 it really is that simple .
The below Video is for general information on the emulators ONLY & is NOT part of this listing.
NOTE:
Some vehicle makes, when accessing SRS / AIRBAG live data on a diagnostic scanner, may not display the resistances of the SRS devices also if you have more than one faulty srs / airbag device, then you will have to work through them one at a time.
Any questions please feel free to ask.
We have designed the X1 Ω selector knob to rotate continuously 360° clockwise or anticlockwise 0 - 0 Ω this way you can select any resistance easier. The X.1 Ω knob rotates 270° 0 - 0.9 Ω.
This emulator was designed originally for srs / airbag diagnostics, but has also proven very useful in other fault finding procedures. This emulator will enable you to simulate over 100 different resistances including "0" ohms, any of these resistances can be selected by turning the selector knobs to the required test resistance.
- All resistances are Max .25 watt ¼ watt +/- 3% tolerance.
- Professionally quality printed vinyl resistance dial fascia (that won't fade away unlike some home printed labels).
- 2 x rotary switch that clicks into any chosen position.
- The Case material is ABS Plastic and the diamensions are approximately 75mm x 48mm x 27mm + 13mm knobs.
- Flexible long life test leads approximately 200mm Inc exit rubber anti-stress grommet & pins.
NOTE:
If the yellow pin wires are lengthened then the resistance tolerance will change, please remember this if you decide to check the srs assist unit using a good quality ohms meter, make sure your meter ZERO's, do not use the meter probe leads, just plug in the 2 leads directly from the srs assist unit into your ohms meter as the leads on your meter have a resistance, this means you will not read the srs assist units true readings.
We designed & built this item, as there was nothing like it on the market. Developed to assist you in SRS / AIRBAG diagnostics. These emulators will save you time and money, every time you use them, Please see general info video's below.
Quality built for professionals, very useful when it comes to SRS / Airbags troubleshooting, testing the system is working by enabling you to simulating the resistance of a faulty or missing device to ensure the system is fully functional, making troubleshooting a lot more easier and accurate, avoiding the expense of purchasing unnecessary parts.
You can also simulate different resistances inc a short circuit, no need to disconnect emulator, just turn both knobs to “0” ohms. You can also watch the ohms live data on your compatible diagnostic scanner change, whilst increasing / decreasing the resistance, proving the wiring and the SRS ECU are OK.
SIMPLE TO USE:
Emulator resistance is easily adjustable, the left control knob goes up 1 ohm per click and the right hand knob goes up in 0.1 ohm per click giving you a total of over 100 different resistance's between 0 ohms and 11.9 ohms. So for example say you wanted to test at 6.8 ohms simply turn the left hand knob to position 6 and the right hand knob to position 8 it really is that simple .
The below Video is for general information on the emulators ONLY & is NOT part of this listing.
NOTE:
Some vehicle makes, when accessing SRS / AIRBAG live data on a diagnostic scanner, may not display the resistances of the SRS devices also if you have more than one faulty srs / airbag device, then you will have to work through them one at a time.
Any questions please feel free to ask.
SUGGESTIONS FOR USE
Used for Diagnostics on Airbag Systems or to FOOL the airbag ECU into thinking the removed / faulty part/s are present & working.
Or maybe You've replaced a seat with a sports seat and harness's or replaced the standard steering wheel with an aftermarket one.
With the help of this resistor, it can turn off the SRS/Airbag light, one resistor is needed for each removed / faulty airbag or pretensioner. Resistors will only work on a working system, they will not work on a system that has logged crash data.
You will be able to simulate resistances of faulty airbag system parts, such as:-
With the help of this resistor, it can turn off the SRS/Airbag light, one resistor is needed for each removed / faulty airbag or pretensioner. Resistors will only work on a working system, they will not work on a system that has logged crash data.
You will be able to simulate resistances of faulty airbag system parts, such as:-
- DRIVERS AIRBAG:
- PASSENGER AIRBAG:
- SIDE AIRBAG:
- CURTAIN AIRBAG:
- KNEE AIRBAG:
- PELVIS AIRBAG:
- PEDESTRIAN AIRBAG:
- SEAT BELT PRETENSIONERS:
- MOST SRS SYSTEM COMPONENTS WITH AN INFLATOR:
All SRS Products are resistance tested before dispatched.
Please see our other items for specific device resistance values. The most common resistances are:- 2.2 Ω, 2.7 Ω & 3.3 Ω:
It's your responsibility to choose the correct resistance.
It's your responsibility to choose the correct resistance.
If you
have any problems choosing the correct resistance or troubleshooting then our SRS ASSIST resistance
emulators will help, please see info below.
!!! WARNING !!!
Working on the airbag system is DANGEROUS and should only be repaired by a qualified technician & follow the manufactures safety procedure.
PRECAUTIONS:
Never make any measurement directly on air bag module(s) or seat belt tensioners. A fault in these components is determined by a process of elimination using Resistance Emulator.
To avoid accidental air bag deployment when trouble shooting SRS, DO NOT use self-powered electrical test equipment, such as battery-powered or AC - powered voltmeter, ohmmeter, etc. when air bag module(s) or seat belt tensioners are connected to SRS.
!!! WARNING !!!
Working on the airbag system is DANGEROUS and should only be repaired by a qualified technician & follow the manufactures safety procedure.
PRECAUTIONS:
Never make any measurement directly on air bag module(s) or seat belt tensioners. A fault in these components is determined by a process of elimination using Resistance Emulator.
To avoid accidental air bag deployment when trouble shooting SRS, DO NOT use self-powered electrical test equipment, such as battery-powered or AC - powered voltmeter, ohmmeter, etc. when air bag module(s) or seat belt tensioners are connected to SRS.
some info on our srs resistance emulators that may be of interest
These emulators below are built for the professionals and are very useful when it comes to SRS / Airbags troubleshooting, testing the system is working by enabling you to simulating the resistance of a faulty or missing device to ensure the system is fully functional avoiding the expense of purchasing unnecessary parts.
You can simulate different resistances, watching the ohms live data on your compatible diagnostic scanner go up or down proving the wiring and the ECU are OK.
If you are having problems finding the correct resistance for an SRS device, then please watch this video below.
The above Video is for general information ONLY & is NOT part of this listing.
FOR MORE INFO. On our Range of Quality Professional SRS Resistance Emulators SEE OUR OTHER ITEMS
Developed for GARAGES, AUTO ELECTRICIANS & DIY WORLDWIDE.
If you have any questions or concerns about any of our items, please contact us before purchasing.
Terms & Conditions
- AIRBAG / SRS FUSED RESISTORS: We DO NOT guarantee that these items will WORK for you or that the SRS/Airbag light will go out, Please remember this when purchasing.
- YOU UNDERSTAND what these items can be used for and also how to use it as No instructions are provided.
- NOTE: if you have more than one faulty SRS / Airbag device, then you will have to work through them one at a time You may have to reset / clear the SRS / Airbag fault codes in the ECU, every time you select a different resistance, unless you're lucky & select the correct resistance first time.
- This product is NOT a replacement for any SRS / Airbag part & is NOT a reset tool, it has been designed specifically as a diagnostic aid.
- As Per eBay Guidelines , we are Unable To Change Your Shipping Address Once We Received Your Payment.
- If You Wish To Cancel Your Order Then You Can Send Back The unused Item For A Full Refund.
- All our products have been checked and packaged in good condition.
- All Buyers that do not ask for combined postage total invoice or have purchased multiple items. We reserve the right to post all purchased items in the same package, even though you may have paid postage multiple times. We are unable to refund you for the postage, once you have paid. If you have purchased items from multiple listings, and have paid for standard post, we may at our discretion upgrade the postal service used to a tracked service meaning you will receive all your items at the same time and also safely. This is at our discretion.
- WE ARE NOT LIABLE FOR ANY DAMAGE CAUSED BY THE USE OF THESE ITEMS; HOWEVER YOU CHOOSE TO USE THEM.
Returns & Refunds
We offer a 30 day money back guarantee. If you are not satisfied with our product, please return it to us within 7 days and we will issue a refund.
Any return of faulty items we will cover the return postal cost. Please note, if you don't want the item for any other reason postal charges is yours. Any return, please send by recorded post only.
If you didn't receive the item, please wait for maximum 14 days and kindly inform us within 14 days. Prior to return, Please contact us, we will give you the return shipping address.
IMPORTANT NOTICE - PLEASE READ
When you receive purchased articles and if you do not require it any more or feel it is not as described, please contact us immediately. We will offer a replacement / full refund for undesired procurement's.
Please note that opening 'Case - Negative Feedback or Neutral Feedback' does not help anyone. In fact, it is a time consuming procedure for eBay and vendor.
Instead, we request you to contact us directly. We assure you that we will try our best to resolve any issues. Rather than use the 'eBay Resolution Centre, please provide us with at least 'Two Working Days' to redress your grievances.
We generally solicit your wholehearted support in this endeavor, thanking you in advance for your understanding.
Customer Satisfaction Is Our No.1 Priority