The fabulous new OnSolar 6W, 4" / 10CM 12V DC LED PWM DIMMABLE IP65 Down Lights are now available!

A contemporary, smart looking LED down lighter with a special light diffusing lens (to prevent glare) and wide 135 degree light spread. An superb unit for use in an energy conscious environment such as Narrow Boat, RV, Motorhome or off grid homes, overhangs etc.

A super low energy, powerful LED alternative with up to 480 lumen output to replace power hungry 35W and 50W halogen down lighters. Use with regular DC constant voltage LED transformers or pure DC 12V battery power. Full 0-100% Dimmable via DC rated PWM unit (see elsewhere in our eBay store).

With it's low profile depth of just 21.3mm it can be installed just about anywhere, a great lamp to install in ceilings or larger units and display cases. When installed into vertical surfaces it will create a gentle wall wash effect. Spring loaded clips are held back whilst inserting through mounting hole, for a simple and easy DIY fit.
Ideal lamps for ultra low energy lighting in Off Grid household, marine and caravanning lighting projects

Warm White and Medium White options available!

**All lamps suitable for 12 volts DC**

The 4" 6W OnSolar downlighter specifications:

Light dispersion:
135°
Ingress protection:
IP65
Unit Colour:
White
Colour  temp:
 Warm White 2700°K (Degrees Kelvin) / Medium White 6000°K (choose in drop down).
Lumens:
Massive 450 lumens for warm white & 480 lumens for medium white
Average Lamp life:
35,000 hours
Operating Temp:
-30°C +50°C
Dimensions:
101mm wide x 21.3mm - LOW PROFILE
Recess cut-out:
90mm ∅
Operating Voltage:
12V DC. Suitable 11-16V max. Recommended to use a regulated 12v dc battery or regulated supply / LED constant voltage transformer.
2 Year Warranty
Against premature failure
Approx. output:
Beats a 35W / 50W halogen
Dimmable:
YES. PWM DC rated 12V electronic dimmer. Note: see suitable unit at OnSolar co uk or elsewhere in our ebay store. 

Current consumption:

500ma +/- 7% (1/2 an amp)

SAFETY 1ST### Please ensure the correct rating of cabling is used throughout when installing DC lighting circuits. Long cable runs may require high grade, high amperage cables in order to prevent excessive voltage loss, especially when using multiple lamps on the same circuit.
All circuits should be fitted with a suitably rated safety fuse in order to prevent fire in the event of short circuit.
Use of proprietary lamp fittings is recommended wherever possible to protect and prevent the ingress of insects and damp where lamps may be exposed in external / exterior light fittings.
Note: 12V 'AC’ transformers or any kind of adaptor/ transformer which does not produce DC power should not be used. If using a DC regulated transformer, please ensure that it has enough power reserve for your application.
For any remote application, we recommend the use of Lead Acid or other quality rechargeable batteries and / or using a solar ‘PV’ panel & regulator to replenish power as necessary.

Ideal for Domestic, Marine and workshop lighting when working with a 12v dc supply.

 

Check out our other items! See more 12V Low Energy Lamps

This product has been designed to work with extra low voltage applications; nominal 12V DC (10V to 16V DC) and is not suitable for regular AC use.

PLEASE DO NOT USE 120V or 240V AC with this product.