32 CH USB Servo control module& wireless handle PS2 controller for arduino robot
Fast shipping From United Kingdom

 A102-1_Copy

Items Description：
 
This is servo controller board with 32 channel. Up to 32 servo motors can be controlled at the same time, either by using a software on a PC, or UART communication ( TTL serial port) of MCU (51, AVR, ARM, FPGA, PIC, etc.) to send commands to control the steering.You can also download instructions to the servo motor controller for offline operation.Wireless device compatible, it can also being set by the program we provided
  • More powerful MCU
  • Higher controlling accuracy
  • Offline operation function
  • Identify baud rate automatically

Feature:

  1. Controlling MCU power supply: 6.5~12 V or 3.5~5.5V. (USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB.)
  2. Servos power supply: DC (depends on the motors, generally 5V DC)
  3. Control channels: 32. (can be controlled at the same time and the accuracy can be adjusted)
  4. Communication Input: USB or UART (TTL or USART). (The Bluetooth or some other wireless module can be used to make the controlling)
  5. Signal Output: PWM (Accuracy 1us).
  6. Servo motor resolution: 1us, 0.09 degrees.
  7. Baud Rate: 9600,19200,28400,57600,115200,128000(recognized automatically)
  8. Servo motors supported: Futaba, Hitec or some other Servos Motor controlled by PWM.
  9. Dimensions: 63.5mm x 43.5mm x 1.6mm.
  10. Control mode: USB and UART (TTL) to accept command. (Comes with USB data wire and PC controlling software)
  11. Flash: onboard 512K ROM(If every command is used to control the 32 motors at the same time,more than 500 commands can be saved.)
  12. Dimension : 63.5mm x 43.5mm x 1.6mm

usage:

1. Open wireless receiver, solder with 7 dupont line according to the order of the picture showed.
2. Connect 7 dupont line with the main board according to the order shown.
3. Set up all buttons’s instructions of PS2 controller via computer software.

A102-5

Note:

The wireless handle is designed for servo controller module, remote distance about 8 - 10m, using two AAA battery.

 Package list:

  • 1 pc 32 Channel Servo UART USB Controller board
  • 1 pc Remote handle controller kit
  • 1 pc remote receiver
 
  • Item will be shipped within 1-2 working days after full payment is received.
  • Please make sure payment address in PayPal is correct. 
  • Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy.
  • We appreciate prompt payment and look forward to your business in the future.
  • In the unlikely event that a return is request, all returns must include all original items undamaged, in re-saleable condition.
  • Refund request is available within 1 week and Exchange request is available in 1 months after parcel received & returning the item as the same condition as received.
About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us About us
Please contact us if the item has not arrived within 30 days for any reason. We reserve the right to refuse the order for all non-registered bidders which is reported from eBay. Please bid ONLY if you agree to the above terms.
  • Your 5-star positive feedback will be highly appreciated..
  • Please contact us before leaving a negative feedback. We would try our best to help you solve the problem. Please allow us to reply your email within 1-2 Days.
  • If there are any issues with the purchase, please contact us at ebay message or Email, We will reply you ASAP.
Copyright All Rights Reserved.
PushAuction