Klotz Neutrik Tour Grade Heavy Duty Lead Quality At Its Best

The cable has a special flexible PVC jacket, a copper spiral shield OFC and stranded copper inner cores that are twisted. The cable has ultra-low capacitance (60 pF/m) for better clearer sound reproduction. It has all the features that are expected from a brand cable. 

This lead is made up by us Ultimate Pro Audio Ltd in our workshops by professional technicians with many years of experience. We only use high quality components when making any lead this ensures you will always get a professional reliable lead that will not let you down when you are under pressure to perform at your best. Klotz and Neutrik are both made in Germany. Both Neutrik and Klotz have their very own websites, which reinforces their commitment to professional audio applications. We have looked at many cables on the market from all over the world and there very few that are as high quality as this cable. The connectors are one of highest quality that are available, made to the high specifications, CNC machined reliable and robust. We only use genuine Neutrik connectors.

 PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100mm of cable FREE to compensate for the connectors.

Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable.

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through eBay messages.

Choose your Colour of cable Black Red Yellow Green Blue Grey White

Klotz professional fully balanced twisted pair lead with Neutrik Male XLR and Neutrik TRS 1/4" 6.35mm Jack Plug

Developed for high demands of everyday use, including Stage, Concert, Mobile DJ's, Studio etc.

Typical Applications Examples

To interconnect audio equipment such as:

• Patching audio equipment in a rack etc
• Connecting mixer output TRS to active powered speakers
• Signal input link between amplifiers as a link
• Input into mixer channel

For Mic/Line level use.

Note

This lead is for mic/line level signal and should never be used on the speaker output of an amplifier to connect a passive speaker. If you are after this type of lead please see our e shop for more leads.

Features

• Ultra-low capacitance (60 pF/m)
• Extremely flexible cable
• Reliable and robust

Specification KLOTZ Mic Cable MY206

• Conductor: stranded bare copper, 28 x 0.10 mm
• Cross Section: 0.22 mm2
• Insulation: PE
• Core Arrangement: 2 cores + cotton tracers, twisted
• Shielding: bare copper spiral shield
• Outer Jacket: PVC, matt
• Overall Diameter: 6.15mm
• Min Radius: 30mm
• Working Temperature: -20C / +70C
• Conductor Resistance: 85 ohm/km
• Capacitance:
  • Cond/Cond. 60 pF/m
  • Cond/Shield 110 pF/m
• Insulation Resistance: > 100 Mohm x km