iCarsoft Multi-system Scanner i908 for Audi / VW / Seat / Skoda
+OBDII (Diagnose Single Brand of all Models,OBDII-16 DLC)

2.8” TFT 320*240 pixels Multi-system Scanner 
 

The iCarsoft i908 is a professional vehicle fault diagnostic tool developed by iCarsoft Technology Inc.. Specially for full system of one vehicle brand. This product supplies colorful TFT screen and unique diagnostic software. The i908 Multi-system Scanner supports full system diagnosis. It enables technicians to accurately diagnose complex problems. This ergonomic scan tool, though sophisticated yet easy-to-use, makes your vehicle service experience much more pleasure! It’s a powerful DIY tool, test modes include:

• CANBUS,
• ISO9141,
• KWP2000, and
• J1850

The iCarsoft i908 is specifically made for the following VAG vehicle types:

Audi vehicles 1996 and newer 
Seat vehicles 1996 and newer
Skoda vehicles 1996 and newer
VW vehicles 1996 and newer 

It also works on all other OBD2 compliant vehicles (Engine and ECU only):

Petrol engines year 2002 and newer 
Diesel engines year 2004 and newer

System and Vehicle coverage for Audi and Seat

Vehicle coverage:

• Citigo (2012 and later)
• Fabia I (1996 to 2008)
• Fabia II (2007 to 2010)
• Fabia (2011 and later)
• Felicia (1995 to 2001)
• Octavia I (1997 to 2011)
• Octavia II (2004 to 2013)
• Octavia (2013 and late)
• Rapid (2013 and later)
• Roomster (2006 to 2011)
• Superb I (2002 to 2008)
• Superb II (2008 and later)
• Yeti (2010 and later)


System coverage:

• 01 Engine electronics
• 02 Transmission Electronics
• 03 Brake Electronics
• 08 AC/Heating electronics
• 09 Electronic Ctrl Electronics
• 10 Parking Assist System 2
• 15 Airbags
• 16 Steering Wheel Electronics
• 17 Instrument Cluster
• 18 Aux heating
• 19 Gateway data bus
• 22 4WD Electronics
• 25 Immobilizer
• 36 Driver's side seat adj.
• 37 Navigation
• 3D Special Function
• 42 DRIVER-DOOR ELECT.
• 44 Steering assistance
• 46 Central Control Module
• 47 Soundsystem
• 52 PASSE.-DOOR ELECT.
• 55 Headlight range control
• 56 Radio
 

OBDII Function

• 1. Read Codes

2. Erase Codes

3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.

4. Data Stream

5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.

6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.

7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.

8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.

9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.

10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes

11. Turn off Check Engine Light (MIL), clear codes and reset monitors

12. Read live PCM data stream

13. Support CAN (Controller Area Network) and all other

14. Multilingual menu and DTC definitions- English, Spanish, and German, etc

15. Read pending DTCs

16. Read permanent DTCs

17. DTCs search

18. Supports all the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.

19. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.

20. Comprehensive Help, Including OBD Parameter, Mode Explanations & More