EVCO EVK211P7VXS 230VAC DIGITAL STATIC THERMOSTAT / CONTROL WITH PTC PROBE RANGE: -50/+150 DEGREES CELSIUS - MEDIUM TEMP REFRIGERATION / CHILLER CONTROLLER
Technical data
Box: self-extinguishing grey.
Frontal protection: IP 65.
Connections (use copper conductors only): screw terminal blocks (power supply, input and output), 6 poles connector (serial port; by request,) 4 poles connector (to the remote indicator); ex-tractable terminal blocks (power supply, input and output) by request,
Working temperature: from 0 to 55 °C (32 to 131 °F, 10 ... 90% of relative humidity without condensate).
Power supply EVK211: 230V / 240V
Insulation class: 2.
Alarm buzzer: by request
Measure inputs: 1 (cabinet probe) for FTC/NTC probes.
Working range: from -50.0 to 150.0 °C (-50 to 300 °F) for PTC probe, from -40.0 to 105.0 °C (-40 to 220 °F) for NTC probe.
Resolution: 0.I °C/1 °C/1 °F.
Digital outputs: 1 relay:
• compressor relay: 16 res. A® 250 VAC (change-
over contact); 5 FLA, 30 LRA.
The maximum current allowed on the load is 10 A.
Serial port: port for the communication with the supervision system (through a serial interface, via TTL, with MODBUS communication protocol) or with the programming key; by request.
With reference to the wiring diagrams: ■ for EVK211 : terminals 1 and 2 are available only in the models with power supply 230 VAC and 115 VAC; terminals 8 and 9 are available only in the models with power supply 12 VAC/DC and 12-24 VAC/DC ■ port 1 (by request) is the serial port for the communication with the supervision system (through a serial inter-face, via TTL, with MODBUS communication protocol) or with the pro-gramming key; the port must not be used at the same time for the same purposes ■ port 2 (by request) is the port for the communication with the remote indicator; the indicator shows the quantity you have set with parameter P5.
The SEI link to the PDF instructions can be provided before purchase upon request. Otherwise they are almost always included with the item upon delivery.
Please see image about instructions required to be carried out after purchasing this item. Item returns will not be accepted if you are not technically qualified to perform tasks required.
WE STOCK A MASSIVE RANGE OF EVCO DIGITAL CONTROLS FOR ALL REFRIGERATION / FREEZER / HEATING APPLICATIONS. IF YOU CAN'T FIND THE CONTROL YOU REQUIRE IN OUR LISTINGS, OR ARE UNSURE AS TO WHICH IS MOST SUITABLE PLEASE SEND US A MESSAGE.
EVK is a range of controllers for the management of refrigerated cabinets, tables and islands.
They are available in compact version, in the standard size 74 x 32 mm; the user interface consists of a custom display (with decimal point and function icons), three or four keys and guarantees an IP65 protection rating, for easy cleaning.
Some controllers have a 30 res. A @ 250 VAC electromechanical relay for the direct control of high power compressors, avoiding the use of contactors.
Others have the real time clock (to store the HACCP alarms) and are able to protect the compressor (causing it to switch off) if the condenser temperature is outside an allowed range.
Installation is by panel, with snap-in brackets.
PLEASE CONTACT US IF YOU REQUIRE MORE INFORMATION ON THIS ITEM
DELIVERY INFORMATION