ANNEALED SOFT DRAWN 7/8" 22MM OD | 1.40MM THICKNESS |18 METRE ROLL | PANCAKE COPPER TUBE COIL - FOR AIR CONDITIONING INSTALLATION - R22 & R410A RATED
Please note the size of this copper tube is measured by the outer diameter (OD).
Australian Standards Approved, AS/NZS 1571
Manufactured to Australia / New Zealand standard AS/NZ 1571
Suitable for R410A Refrigerant: AIR CONDITIONING INSTALLATION DOMESTIC & COMMERCIAL GRADE
ENDS PINK CLEANED CAPPED IN SHRINKING WRAPPED PLASTIC
Use in both high and low-pressure applications including; air conditioning, refrigeration, mechanical services and medical gas lines.
Also available as straight lengths, 6 Metre Hard Drawn local pickup only, please enquire
Supported by a full range of copper Refrigeration Fittings.
Our Copper is available in sizes 4.76mm and up mainly in wall thicknesses specifically designed for R410A air conditioning refrigerant.
The internal cleanliness of air conditioning, refrigeration and medical gas tube is critical in order to prevent contamination of the components in the piping system. Our suppliers use a unique manufacturing process and certified laboratory to confirm that the total residue does not exceed 0.038g/m² as specified in AS/NZ1571.
The use of 15% silver solder is recommended when brazing tube or fittings for use with R410a or other high-pressure refrigerants. A silver brazing flux can be used and is available at our store.
R410A has a 60% higher operating pressure than R22 thus requiring a thicker wall copper tube and significantly stronger (R410A) copper fittings. The minimum allowable tube wall thickness is 0.81mm + except for 3/16". Please see listing title for actual thickness specified as outer diameter.
Alternative Part Numbers
Extra Information
PLEASE CONTACT US IF YOU REQUIRE MORE INFO ON THIS ITEM.