• Number of Channels 1
• Rated Power (RMS Continuous Power):
• 200 Watts x 1 @ 4-Ohm
• 300 Watts x 1 @ 2-Ohm
• Total Power (Sum of Rated Power): 300 Watts RMS
• Dynamic Power (PVC/PowerCube® Measurement):
• 260 Watts x 1 @ 4-Ohms 0° Res
• 444 Watts x 1 @ 2-Ohms 0° Res
• Bridgeable: no
• Efficiency (average):
• 74% @ 4-Ohm
• Crossover Controls:
• High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
• Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
• All-Pass: Yes
• Tone Control:

• Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
• Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
• Function depends upon LP/AP/HP switch position
• Signal Input: Low level: 1 RCA pair
• Signal Output: Low Level: 1 RCA Pair
• Power Input Connector: Captive C-Clamp
• Power Wire Gauge: 8-4 AWG
• Speaker Output Connector: Captive C-Clamp
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Heat Sink Type: Cast aluminum
• Cooling: Convection
• Remote Controls: Optional Punch Level Control (PLC2) Ready
• Visual Indicators:
• Power
• Thermal
• Protect
• Circuit Topology Class: Class A/B
• Frequency Response: 20Hz to 20kHz +/- 1.0dB
• Shipping Weight: 9.5 Lbs. (4.30 Kg.)
• Dimensions (HxWxL): 2.38 x 7.76 x 9.86 (in)
• 6.05 x 19.71 x 25.04 (cm)

The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz.
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection