Description
POLYSET
is a repair set which consists of : Preaccellerated polyester resin,
fibre glass tissue, hardening component, mixing vessel, mixing tool and
application instructions.
Characteristics
- very easy to apply
- 2-components
- transparent
- fast drying
- permanent very strong repair bond
Applications
- Strengthening, reinforcement and replacement of damaged parts in carbodies, polyester, wood
- Repairing of holes in carbody parts
- Repair and replacement of rusted parts
- repair product for larger damage on boats, surfboards etc.
Directions for use
Application Method :
- Cut the glassfibre tissue to the requested size, with an area of 3 cm exceding each side of the substrate to be repaired.
- Mix the amount to be used with 2-4% Hardener in the mixing vessel until the mass is homogenous.
- Apply a layer of the polyester resin mixture with the brush onto the substrate.
- Press the cut glassfibre tissue onto the substrate and apply a new layer of the polyester resin mixture.
-
Repeat this procedure after drying, taking care that the next piece of
fibre glass tissue will exceed the previous piece by 1cm on each side.
- Sand with rough grained sandpaper after hardening and finish with a thin layer of Metal Plastic.
Application Temperature :+10°C until +25°C
Clean with : acetone
Repair with : Polyset