Neutrik Male XLR to TRS Jack 1/4" Van Damme Active Monitor Speaker Cable
TRS 1/4 Jack to Male XLR cable, can be used with active speakers / active studio monitors or for patching.
This cable features a combination of ultra pure silver plated oxygen free copper (UPOFC), and bare copper stands within the twisted pair of signal conductors, then shielded with a spiral of 80 oxygen free ultra-pure copper strands which screens out RF and EMI interference, low noise. The sound this cable delivers is accurate and neutral, allowing tight yet fuller deep bass along with strong detailed mid-range, and a high-end sparkle which is satisfying.
We use silver 4 percent solder when making this cable. Why 4 percent solder? The finished solder joint is harder than standard lead-free solder and gives a bright shiny finish, it also helps with the sound giving that end sparkle found in Van Damme cable. The XLR contacts are also silver plated to match the cable, all complementing each other.
Custom made for you with choices length and 10 colours of cable
All Ultimate Pro Audio cables are professionally manufactured on-site upon order. We have over 30 plus years of experience in the pro audio trade, which includes live and high-end recording studio cables manufacture and installations. We have gained many happy customers over the years who come back time and time again. We have supplied: BBC, SKY, famous celebrities, AV companies and many more. Trust in buying our leads is a key factor for many of our return customers along with the knowledge we are using genuine brands and high-end 4 percent solder and soldering equipment to get a perfect professional finish.
Typical applications for this lead
Mixer output balanced TRS Jack to Active Monitor speaker XLR input (note an active speaker is a speaker with an amplifier built into it)
Mixer TRS 1/4 Jack output balanced to XLR amplifier inputs
Link lead between power amplifiers
Patching in racks between FX units, EQ media output devices.
Can be used for any mic/line level use
Please note that all inputs and output must be balanced on your audio equipment
Cable Length
PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS
Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100mm of cable FREE to compensate for the connectors.
Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable.
If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through eBay messages.
We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through eBay.
If you want a longer lead let us know.
Van Damme Cable Specification
A cable that is trustworthy reliable hard wearing. Van Damme Tour Grade Classic XKE Microphone cable combines flexibility, durability, noiseless operation within a balanced setup, and excellent handling characteristics. Van Damme cables can be found in many film and recording studios, professional touring applications, professional DJ setups, education sectors, and hire companies. It really is a great cable. There aren't many cable companies that do have their own website but Van Damme is one of the exceptions. Their website has many famous artists on there and many stories where Van Damme cable has been used in touring and hiring applications. Please see http://www.van-damme.com and click on tour.
Mechanical specification cable
Conductor Material Bare silver plated ultra pure oxygen free copper wire
Stranding 7 x 0.10mm
Material Bare ultra pure oxygen free copper wire
Stranding 21 x 0.10mm
Insulation Material XLPE Cross linked polyethylene
Diameter 1.60mm ±0.10
Colour coding Red, Blue
Cabling Type Twisted pair with cotton yarn fillers & paper wrap
Lay length 25mm
Screen Type 80 x 0.10mm close lap spiral bare oxygen free copper wire
Jacket Material Flexible PVC/Neoprene composite
Average thickness 1.40mm
Overall diameter 6.35mm ±0.15
Physical properties unaged
Jacket (at 60ºC) Tensile strength >8N/mm2
Elongation >250%
Heat shock test 120 ºC x 1 hour - no cracks
Test voltage 1000 Vdc x 1 minute OK
Electrical characteristics
Resistance Conductor Ohm/Km <85
Screen Ohm/Km <85
Insulation M Ohm/Km >5000
Capacitance Core to core pF/m 56 nominal
Neutrik Connectors Van Damme Cable:
Neutrik make some of the best connectors that are available the world over. There are many copies of the Neutrik connectors available on the internet, don't be fooled by the cheaper makes they may break down and cause problems, so why risk it? These are genuine Neutrik connectors. The cable is genuine Van Damme and is renowned for quality, performance, robustness and tip top sound quality.
Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms