|
Sold seperately these blades would cost $24.95
Precision Cutting? Multi-tool users listen up.
All straight cuts longer than 6 inches long should be done with a circular blade. The roundness of these blades makes it easier to following a cut-line. Using your Rockwell SoniCrafter lightly cut into the material for the entire length of the cut. Now you can progresively make deeper full length cutting passes until you cut all the way through. This is how you do precision cutting with a multi-tool machine. That's why you need to get a set of Circular Saw Blades.
 |
1 Pieces: 3-1/8" Segmented Circular HSS Rockwell SoniCrafter Saw Blade (R020)
Best for cutting: Thin metals, nails, screws, wood, plastics, drywall (sheetrock), fiberglass, laminates
This 3-1/8” diameter flat stock circular saw blade is made from M2 high speed steel and has a cutting depth of 1-1/8 inch. The (segmented) or flat side allow you to cut all the way to a stop surface. Excellent for wood and metal cutting. Use this HSS blade for cutting metal up to 20 gauge thick.
|
 |
1 Pieces: 3-1/8" Circular HSS Rockwell SoniCrafter Saw Blade (R021)
Best for cutting: Thin metals, nails, screws, wood, plastics, drywall (sheetrock), fiberglass, laminates
This 3-1/8” diameter flat stock circular saw blade is made from M2 high speed steel and has a cutting depth of 1-1/8 inches. Use this blade for for wood and metal cutting. This HSS blade can cut metal up to 20 gauge thick.
|
 |
1 Pieces: 3-1/2" Flush Cut Segmented Rockwell SoniCrafter Circular Saw Blade (R022)
Best for cutting: Thin metals, nails, screws, wood, plastics, drywall (sheetrock), fiberglass, laminates
This 3-1/2” diameter segmented circular saw blade has a recessed attachement center cup for Flush cutting applications. It is made from M2 high speed steel and has a cutting depth of up to 7/8 of an inch deep. This blade is excellent for wood and metal cutting. Use this HSS blade for cutting metal up to 20 gauge thick.
|
This blade is ONLY compatible with the Original Style Rockwell SoniCrafter and the Original Worx SoniCrafter.
This blade by design is also fully compatible with the Shop Series RCS5100K Sonic Tool, Ridgid JobMax, Ryobi JobPlus, Challenge Xtreme, Draper, Parkside PMFW 280 A1, Smart SMT250, Task Force and the AEG oscillating multi-tools.
|
|
|
|
