This product does not need to stick adhesive, directly to the side or
instrument desk crevice in the door, installation of worry, also don't
have to worry about leave behind traces of glue, is the choice of owner
autonomy installation.
INCLUDES:
1 x Cold Light Strip
1 x Power Contactor and Driver
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Specifics:
-LED Type: Cold LED Light Strip
-Direct inserted in cigarette lighter
-180 degree for adjusting
-Cold
light can cut use, cut the part can be discarded, ownership length does
not affect the use of the remaining part of the wire.
-EL light length: 1M/2M/3M/5M/10M
-10 Colors: Red/Yellow/White/Ice Blue/Blue/Green/Purple/Pink/Orange/Fluorescent green .
Electroluminescent tape is thin copper wire coated in a phosphor. Its soft, flexible nature makes it ideal for use anywhere and everywhere:
- Home decor
- Vehicle decor
- Shop and store displays
- Party and parade costumes
- Toys and model making
- Safety/emergency lighting
Use:
General instrument desk will need about 1 ~ 3 m, a door will need about 1
~ 1.5 meters, specific see instrument desk walked curved line. Measure
good measure after the reserved long points, redundant can directly cut
or hide into the interior trim panels.
Feature:
Product quality and longer life
More suitable for automotive use, flat round, the greater the force, not easy to fall off
Special quasi-cold light emitting principle and power consumption is small, so only specific power drive to run properly!
Cold light drive also has several advantages as follows:
(1) energy-saving. Its low power consumption, the decline in the total input power of the lamp line, better energy-saving effect.
(2) the elimination of the strobe light-emitting more stable. It will help improve visual resolution, improve efficacy;reduce visual fatigue of continuous operation, help protect eyesight.
(3) The starting point is more reliable. Once the starting point for success.
(4) stable input power and output luminous flux: high quality products, good voltage regulation, power,voltage deviation is large, the light source constant power to maintain stable illumination conducive to energy conservation.
(5) to extend the life of the lamp wire. The decline in high-quality products,
constant power and lights line current, and reliable starting point lights line can prolong life.
Instructions for use:
1 cold light must be connected with the drive to use, and can not be connected directly to the power supply.
Cold light can use double-sided tape or glue fixed and then the car.
Cold light can cut use, cut the part can be discarded, ownership length does not affect the use of the remaining part of the.
Tips: cold light requires the player Little headlight alignment,
alignment know nothing of the lights have the players, the shop recommended repurchase went to the master installation.
|