1B Solar Wireless Perimeter Alarm & Dialler System
This Long Range Solar Powered Wireless Perimeter Alarm is
supplied with of a set of 1B-100 Wireless Perimeter Beams, a versatile
4- Channel Indoor Receiver & a Land Line Auto-Dialler.
The beams have a 100 metre detection range & 900 metres
transmission range back to the Receiver, the Auto-Dialler will contact
up to 9 key-holders by Telephone (with your own pre-recorded message)
should the system be Activated.
Receiver:
The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:
- 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
- Adjustable 12v DC Outputs (often used with sirens & flashing lights).
- ON/OFF Switch.
- Volume Control.
- Will work with up to 128 sets of Detectors.
- Optional Reminder Bleeps.
- Exit Delay Option.
Wireless Beams:
These impressive Solar Powered Wireless Perimeter Beams (often called laser beams) are packed with impressive features listed below:
- Battery Powered with Built in Solar Charging: (making for easy installation).
- Dual Detection Technology: (prevents false alarms from small animals and moving debris).
- 100 metre Detection: (covers more are with less detectors).
- Impressive 900 metre Wireless Range:
- Quality Build.
- Supplied with Wall & Pole Mounting Brackets.
- Test Lights: (for easy installation).
- Top up charging Ports.
The Dual Detection Technology works by having a
pair of Detectors (set 60 mm apart from each other) on each Beam, both
Detectors have to be breached simultaneously to create an activation,
allowing small animals, insects, leaves & debris to safely pass by.
There are a pair of detectors on each size of Beam, so these 1B-100 have
one pair of detectors, a 2B-100 would have two pairs and the 3B-100
would have three pairs, each pair of detectors work independently of
each other resulting in the 3B-100 Beams having three chances to detect
an Intruder.
They also have an additional Charging Port which can be used to give
the Beams a boost charge should you experience a lengthy duration of low
sun light, or perhaps one of the beams needs to be fitted into a
slightly covered location.
They are very easy to install as they have a built in Red Glow Light (for easy lining up).
You can use up to 128 sets of Beams with this Receiver & 32 sets
should you decide to add a Solar Wireless Siren (part number 004-2810).
Operating Range:
The Wireless operating range between the Beams & Receivers is
900 metres (line of sight) which can be doubled by using the signal
repeater (part number 004-2910).
Auto-Diallers:
The land line Auto-Dialler would be connect to the Internal
Receiver by a short length of bell cable together with having a cable
connected into a Telephone Extension Socket and has the following
features:
- Two personal messages can be recorded (10 seconds long).
- Up to 9 telephone numbers can be programmed (a maximum of 32 digits).
- It will call the programmed key-holders up to 3 times or until switched off.
- Key-holders receiving the call can carry out the following actions:
- Press * = stop the dialer sequence and built in siren (if selected to ON).
- Press # = stop the dialer sequence but the siren will continue for the programmed duration.
- Built in Siren (optional).
- Adjustable Siren Duration (1 - 99 minutes).
- Can be used with Siren or Silent (programmable).
- Dual Trigger.
- Adjustable entry delay (0 - 60 seconds).
- Adjustable exit delay (0 - 90 seconds).
- Backup battery.
Additional Receivers & Beams:
You can add Multiple Wireless Receivers (indoor & external
solar) to this system (no limit) and many sets of additional Solar
Perimeter Beams (4 sizes) plus a range of Sensors and a Smoke Detector.
Sirens:
You add loud Internal & External Wired or Wireless Sirens,
Flashing Strobe Lights, Speech Alerts or activate Lighting from the
internal Receivers or Diallers, please ask for advice.
This is a very versatile Alarm System which can be built
into a system to suit your exact requirements, if you need help in
choosing the correct components please contact us.
Kit Includes:
Receiver:
- 1 x 4-Channel Indoor Receiver.
- 1 x Plug in Transformer.
- 1 x Rear Mounting Bracket.
- 1 x Manual.
Detection Beams:
- 1 x Set of Solar Powered Detecting Beams.
- 1 x Set of Wall Mounting Brackets.
- 1 x Set of Pole Mounting Brackets.
- 1 x Set of Instructions.
Auto-Dialler:
- 1 x Auto-Dialler.
- 1 x Back up Battery.
- 1 x Power Transformer (12v DC).
- 1 x Telephone Cable.
- 1 x Manual.
Specifications:
Receiver:
- Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
- Power Supply: 15v DC 1amp (plug in transformer).
- ON/OFF Button: Yes.
- Adjustable Volume Control: Yes.
- Available Channels: 4.
- Max sets of Beams per Channel: 32.
- Maximum sets of Detectors per Receiver: 128.
- Output Voltage: 12v DC.
- Output Voltage Duration: 1, 10, 60 second & 5 minutes.
- Built in Chimes: Yes (one per channel).
- Reminder Bleep: Yes (if programmed).
- Exit Delay: Yes 5 minutes (if programmed).
- Frequency: 434.6 MHz.
- Standby Current: 20 mA.
- Alarm Current: 180 mA.
- Relay Rating: 24v DC or 120v AC (2 amp).
- Relay Output Type: Momentary N/O or N/C.
- Wireless Working Range: 900 metres (line of sight).
Beams:
- Beam Size: 340 (H) x 123 (W) x 45 (D) mm.
- Power Supply: Rechargeable AA Batteries.
- Charging Method: Built in Solar Panels.
- Mounting Methods: Wall or Pole.
- Detection Range: 100 metres.
- Transmission Range: 900 metres (line of sight).
- Frequency: 433 Mhz.
- IP Rating: IP66.
- Distance Between Detection Beams: 60mm.
- Number of Beams: 1 set.
- Charging Port: 9 - 12v DC (500 m/A to 1 amp).
Easy Programming Method:
- Turn On Beams (switch on rear).
- Mount the Beams.
- Line up By Eye, String Line etc.
- Put the relevant Receiver into Learn Mode.
- Walk through the Beams, at this time (providing you have them correctly lined up), a low red glow will illuminate briefly.
- The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
- Take the Receiver out of learn mode.
- The system is now ready.
Auto-Dialler:
- You can pre-record two 10 second personal message.
- You can program between 1 - 9 telephone numbers into it (up to 32 digits)..
- Dual trigger options.
- Two message options (trigger 1 & 2).
- Built in audible alarm or silent activation (adjustable).
- Siren Duration Adjustable (1 - 99 minutes).
- Very versatile telephone software allowing all telephone lines to be used easily.
- You can program delay trigger from 0 - 60 seconds.
- You can program delay exit from 0 - 90 seconds.
- The system can be used with all types of alarm control panels.
- You can stop the system sending the voice message to other
programmed telephone numbers by pressing * or # on the receiving
telephone.
- Battery backup.
- Plug in Transformer Power Supply (supplied).
Ultra Secure Direct are a UK Company, Despatching Goods from the UK (within 1 working Day), the goods include UK VAT, therefore there is No Chance of the Buyer Receiving any unpleasant Import Duty Taxes upon receipt of the Goods.