How to tension spring

How to change battery

What you receive?
  • 1x Set of buttons
  • 1x Remote case/Blank key
Please Note: This product does not include logos and is an aftermarket product.
What is not included?
  • 1x Remote Electronics (internals)
This listing is intended for when your key has external damage but the internal remote chip still works. Transfer your remote chip to our product and you will have a brand new working remote.
Is this compatible with my car/key? Yes, if your car is one of the following below and your current key/remote looks identical to the product pictured in the main image:
Holden Car Key Models
  • Barina (TM) 2011 - 2014
  • Cruze (JG) 2009 - 2010
  • Cruze (JH) 2010 - 2014
  • Trax 2013 - 2014
Chevrolet Car Key Models
  • Camaro 2010 - 2013
  • Cruze 2011 - 2013
  • Equinox 2010 - 2013
  • Malibu 2013
  • Spark 2013
  • Sonic 2012-2012
  • Volt 2011-2013
Instructions: Replacing the case on your Holden remote is a straightforward task that can be accomplished by anyone. Required Tools:
  • A pair of Circlip (reverse) pliers
  • A small fine point flathead screwdriver
  • A small Phillips head screwdriver
It will take about 10 minutes of your time. Please be aware that most of the time the original key blade will not be suitable for our replacement case. In these cases, you'll need to have your blade cut by a qualified automotive technician or locksmith.
Before we start it is recommended to remove your battery from the old shell. To do this take the back of the casing off by flipping your blade out & using the circlip at the back of the opening where the key came from gently remove the back plate & remove the battery.
  1. If your original shell has a logo on the back using the fine point flathead screwdriver gently lever the logo up. Once the logo is lifted there will be a small Phillips head screw exposed, remove the screw. If your key doesn't have a logo on the back proceed to step 2.
  2. With the blade still unfolded there will be a small opening right behind the blade mounting. Insert the circlip pliers & pry apart the case
  3. Extract the internal circuit board. Please verify that the transponder is present on the circuit board. This is a small, rectangular chip located on the top end of the circuit board. If it is absent check the upper right of the old case. It may need to be transferred.
  4. Place the circuit board & transponder into the new key case in the correct positions. There are always little tabs or clips to put them into to make sure they are 100% aligned with the buttons when complete.
  5. Securely snap & fasten the new case & install the screw in the back. Then conduct a test to ensure that everything functions properly.

For those with a moderate level of handiness, we have included the steps to exchange the blades from the old case mount to the new case mount.
  1. Use a 0.8mm pin punch to extract the roll pin from both new & old key blade mounts. Remember to retain the pins from each.
  2. Note that the pin is inserted into a groove on the blade, which is slightly misaligned in the old blade compared to the new one.
  3. Use a needle file to carefully elongate the groove in the correct direction, checking the alignment with the old blade in the new mount until you can see through the pinhole.
  4. Once the groove is correctly elongated, use the original blade in the new mount and reinstall the roll pin. Finally, reassemble the key.
Case Dimensions: 6.4cm x 3.5cm x 1.8cm
Blade Type: HU100
Details:
  • This is NOT a complete key and does NOT include electronics or transponder chips
  • Our keys are not included with logos
  • Cutting of the key must be performed by an automotive locksmith
  • Generally, a key housing will be suitable if the exterior, internal structure and blade type are identical. If unsure please send us detailed images of your current key
  • When transferring the electronics, please ensure the transponder chip is also transferred. Do not discard any part of the original key until you have confirmation the new key is working (buttons work and car starts)
Warranty and Returns:
We accept 30 day returns and offer 12 month warranty on all items. If the key blade has been cut, we are unable to accept a return. Return postage is at the buyer's expense and a restocking fee may apply.
Disclaimer:
We distribute automotive keys, remotes and casings which are compatible with the vehicles produced by other manufacturers, and which are substitutes for automotive keys, remotes and casings produced by those manufacturers. Except where a product is expressly stated to be a "genuine" product. Our products are not produced by, and are not authorised, endorsed or approved by these other manufacturers. Battery Type: Battery type TBA Battery Access Type: Tool Required AS62368.1 Compliant: Compliance TBA Battery Included: No Contains Coin Battery: Coin Battery TBA
Official eBay Store
SHIPPING RETURNS PAYMENT

Items are generally dispatched same/next business day after payment is cleared however please allow 2-10 business days for delivery when selecting our Free Shipping option, 2-6 for Tracked and Express delivery is 1-3 business days. Our dispatch transit times applies once payment has been cleared and does not include date of dispatch. Your item will be sent via courier or Australia Post letter mail depending on its size and weight. Buyers will be able to trace the delivery online with a unique tracking number for items sent with tracking. For orders that qualify to be sent with a letter service, these orders are untracked. Please note items sent to parcel lockers and parcel collect location that classify as letters will in most cases be redirected to the physical address associated with your MyPost account. Please note shipping transit times are not guaranteed and are estimates only. Please note shipping costs are not refundable specifically if the items are returned or do not arrive within the estimated transit times. Mote Australia is not responsible and will not provide any reimbursement if your order is lost due to an incorrect address being provided or if you have requested an authority to leave or instructions requesting the item to be left and the item is stolen or you are unable to locate the item. Buyers have the full responsibility to provide us with the correct delivery address and mobile phone number on the checkout page before payment. Any changes to address after checkout will not be considered as valid but if notified prior to dispatch we will do our best to apply any changes to your delivery information. Please note: Due to the current COVID-19 situation, this has cause significant delays to certain delivery networks. For areas that have been placed into or recently come out of lockdown, please allow an additional 1-2 weeks to delivery times. Australia Post Deliveries Where goods are sent through Australia Post, the buyer may receive a knock on the door or a card in their letterbox indicating their item is available for pickup from their local post office. A signature is required for collection. A re-delivery fee will be charged to buyers for items that are returned due to incorrect delivery address or failure to collect from the Post Office. Most smaller orders will be sent as regular letter mail which does not require signature and will simply be placed into your letter box. Courier Deliveries All items sent via courier will be able to be tracked online and a tracking number will be emailed to you once the item has been dispatched. We use a combination of Australia Post and Fastway Couriers depending on your location. Items will only be delivered during normal business hours (9am-5pm) on weekdays. Delivery is not available on weekends, public holidays or after business hours. A re-delivery fee will be charged to buyers for items that are undeliverable and/or returned due to incorrect delivery address or unsuccessful delivery.

Returns & Refund Policy Returns Returns are accepted in line with our warranty conditions. PLEASE ENSURE RETURNS ARE SENT BACK WITH OUR RETURN FORM. Any return received back without a return form in most cases will unable to be processed. Should you wish to return a faulty item, please contact us via ebay messages. Photos and/or videos of the item may also be requested to assist in the return process. When a return is authorised, it is the buyer’s responsibility to ensure the product is packaged securely to prevent any damage during the return process. Failure to do so may affect the ultimate resolution to be offered, which may include repairs, replacement items or store credit at our discretion. If the products is unusable upon receiving or there is a major fault, the customer may choose between a full refund via the original payment method or a replacement product. Refunds may take up to 10 business days to be processed. In cases where a replacement product is to be provided, the replacement will be shipped at no cost to the customer. To enable Mote Australia to continue offering the very best price, freight arrangements vary depending upon the time that has expired since purchase. Where the item was collected from our warehouse, the buyer is responsible to return the item at their expense. If the item is required to be returned, the outcome of the inspection should take no longer than 10 business days from the date the item is received by our service department (times may vary). While many spare parts are stocked in Australia, we may need to order certain parts from the supplier on your behalf. Whilst most ordered parts arrive within 15 days, a small number of difficult to order parts may require up to 8 weeks to arrive. 30 Day Returns If your item was purchased in error, or you've simply changed your mind, it may not be too late for a refund. To see if you are eligible please check below: We must be notified within 30 days of you receiving the item that you intend to return it. All relevant returns information will be provided at this time The item must be returned at the buyers cost in original re-saleable condition with all tags and packaging (ready to be put back on the shelf) The item is securely packed to ensure it is received in original and re-saleable condition The item/s are NOT opened, used, worn or damaged, and are in perfect condition when received Do NOT stick or write anything on the item itself or its packaging. Please only write or place postage stickers on the outer postage packaging Handling fees will apply, to be deducted from the refund provided If the item was sent with free postage, a 20% postage fee will be deducted from the refund amount If the item is bulky or exceeds 1kg, a 20% restocking fee will apply notwithstanding the shipping option selected Any shipping costs incurred when returning an item will not be reimbursed If the item was sent with paid shipping, the shipping cost is not refundable and no restocking fee will be charged for items that weight less than 1KG. If the item has sustained damage in transit, or does not return as noted above, a revised refund amount may be required For incorrectly ordered items we do not offer exchanges, it best to post the item back for a return and reorder the correct item at any time We do not offer returns for spare parts which include but not limited to garage motor parts, circuit boards, motors etc If you wish to take up this offer, please send us an email stating your order number, the item/s you wish to return, and the reason for the return. Our Customer Service team will respond to your email. Warranty Mote Australia offer a 12 month warranty on all products used for private household use from the date of purchase. The use of products for commercial purposes qualifies the purchaser to a 3 month warranty period. Warranty cover does not include damage caused by normal wear and tear, accidents, misuse, lack of maintenance, neglect, water damage, moisture, water ingress, corrosion, natural disaster, or other external causes; to damage caused by operating the equipment in a manner outside that described in the instructions. The warranty is considered void if the item has been modified, altered or tampered with by a person (or persons) not authorised by Mote Australia to provide service (not including standard periodic maintenance). Consumable components (and accessories) such as chains, carry bags, batteries, hoses, belts, cables, wheels etc. are not covered once used or for damage caused by general wear and tear. Professionally installed products which include garage and gate motors, motor spare parts, door hardware etc require to be installed by a professional or certified installer and most manufacturers also require regular servicing to adhere to their respective warranty policies. Please note that labour is not covered under this warranty. Until the nature of any fault is determined, the resolution Mote Australia can offer may vary. Where necessary, the item may need to be returned to determine fault/issue. If the products is unusable upon receiving or there is a major fault, the customer may choose between a full refund via the original payment method or a replacement product. Once the fault/issue is clarified, Mote Australia may fit replacement parts or offer replacement parts to the customer. Other alternatives may be offered to the satisfaction of both parties. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Should you wish to claim a warranty on your item, please contact us.

All orders require full payment prior to dispatch.

DISCLAIMER

Garage/Gate Product Disclaimer:

Mote distributes remote controls which are compatible with the door or garage motors and receivers produced by other manufacturers, and which are substitutes for remote controls produced by those manufacturers. Except where a product is expressly stated to be a "genuine" remote, our remote controls are not produced by, and are not authorised, endorsed or approved by these other manufacturers.


Automotive Product Disclaimer:

Mote distributes automotive keys, remotes and casings which are compatible with the vehicles produced by other manufacturers, and which are substitutes for automotive keys, remotes and casings produced by those manufacturers. Except where a product is expressly stated to be a "genuine" product, our products are not produced by, and are not authorised, endorsed or approved by these other manufacturers.


Battery Warning