WindyNation Linear Actuator DC Motor Control Kit with Accessories
WindyNation's Linear Actuator DC Motor Control Kits offer a quick, reliable, and professional method for powering, remotely controlling, and wiring these systems. Wiring and installing these units is simple using the included quick snap locking connectors and cable. You can select from several kit options:
Below describes Control Options selections in the drop-down tab above
Power Supply + Remote Control Option: Includes both the 12 volt power supply and the up/down wireless remote control + wires & connectors for one DC motor or linear actuator
Power Supply Option: Includes the 12 volt power supply + wires & connectors for one DC motor or linear actuator
Remote Control Option: Includes the up/down wireless remote control + wires & connectors for one DC motor or linear actuator
Below describes the Wiring Accessories selections in the drop-down tab above:
No Wiring Accessories: No additional wiring (no 15 Foot Extension Cable and no Double Adapter Cable)
15ft Ext Cable: Adds the 15 foot extension cable to your purchase
Double Connector: Adds the double adapter cable to your purchase
15ft Ext Cable + Double Connector: Adds both the double adapter cable and 15 foot extension cable to your purchase
See Below for Product Descriptions:
Additional technical information and assembly instructions for the LIN-ACT-1 Series Linear Actuators, the Power Supply, and the Remote Control Switch can be viewed in the Owners Manual, which is available on WindyNation's website.
Power Supply:
The power supply converts standard 120VAC wall outlet electricity to 12V DC power. The power supply is capable of powering a maximum of two WindyNation LIN-ACT1 Series Linear Actuators. For other applications, the maximum continuous current draw is 5 amps (60 Watts). Quick snap locking cable connectors are also included.
AC Input Range: 100-240 VAC
DC Output: 12 VDC (5 amps maximum)
Additional Info.: 8ft AC extension cord included and 5ft DC extension cord included
Up/Down Remote Control:
The up/down remote control consists of a receiver and the wireless remote control. The receiver is wired in between the DC power supply and the linear actuators, allowing the remote control to control the movement of the linear actuators. Quick snap locking cable connectors are also included.
DC Input Range: 10-30VDC
Power Rating: 60 Watts (5 amps at 12 VDC)
Remote Control Range: 90 feet maximum (range is reduced by physical obstructions)
Operating Frequency: 433.92 Mhz
Operating Current: 15mA
Switch Type: DPDT ON-OFF-ON (For a linear actuator this is UP-Stop-Down. For a DC motor this is Clockwise - Stop - Counterclockwise)
15 Foot Extension Cable:
The 15 Foot Extension Cable is an optional item. It allows you to quickly add-on 15 feet of cable between the linear actuator (or DC motor) and the power supply. This is convenient if you require a long cable run.
Double Adapter Cable:
The Double Adapter Cable is an optional item. It allows you to quickly connect two linear actuators (or DC motors) to the same power supply/remote control. This is very convenient if you are going to be powering two linear actuators (or DC motors) from the same power source and remote control.