Fitting

1.     Remove all dust and grease from the application area.

2.     Use 3M General Purpose Cleaner and Wax Remover or other mild solvent, such as White Spirit applied with a clean cloth.

3.     Indirectly heat the trim cover and car bodywork using a hairdryer to 30 degrees Celsius, in order to achieve an improved instant bond.

4.     Remove outer covering from tape to expose sticky side.

5.     Apply molding (with tape applied) to the desired area of the car body.

6.     Buff down hardly after applying.

7.      At least 12 hours before testing bond.