NEW COMPACT AIRBAG / SRS RESISTANCE EMULATOR WITH FLEXIBLE TEST LEADS
- 10 x 1.0 Ohms
- 10 x 1.5 Ohms
- 10 x 1.8 Ohms
- 10 x 2.2 Ohms
- 10 x 2.7 Ohms
- 10 x 3.0 Ohms
- 10 x 3.3 Ohms
- 10 x 3.9 Ohms
- 10 x 4.7 Ohms
- 10 x 5.6 Ohms
- 10 x 6.8 Ohms
You can also simulate different resistances inc a short circuit, no need to disconnect emulator, just turn both knobs to “0” ohms. You can also watch the ohms live data on your compatible diagnostic scanner change, whilst increasing / decreasing the resistance, proving the wiring and the SRS ECU are OK.
- Emulator resistances are:
- 0.0 ohms
- 1.0 ohms
- 1.5 ohms
- 1.8 ohms
- 2.2 ohms
- 2.7 ohms
- 3.0 ohms
- 3.3 ohms
- 3.9 ohms
- 4.7 ohms
- 5.6 ohms
- 6.8 ohms
- All resistances are Max .25 watt ¼ watt +/- 3% tolerance.
- Professionally quality printed vinyl resistance dial fascia (that won't fade away unlike some home printed labels).
- 1 x rotary switch that clicks into any chosen position.
- Dimensions are approximately 35mm Diameter x 25mm length + 13mm knob - Case material plastic.
- Highly Flexible Test Leads for durability & reliability, approximately 200 mm Inc rubber exit grommet & pins.
The below Video is for general information on the emulators ONLY & is NOT part of this listing.
NOTE:
Some vehicle makes, when accessing SRS / AIRBAG live data on a diagnostic scanner, may not display the resistances of the SRS devices also if you have more than one faulty srs / airbag device, then you will have to work through them one at a time.
For lots more Airbag / SRS Ready built fused resistors and DIAGNOSTIC TOOLS Please visit my shop.
With the help of this resistor, it can turn off the SRS/Airbag light, one resistor is needed for each removed / faulty airbag or pretensioner. Resistors will only work on a working system, they will not work on a system that has logged crash data.
You will be able to simulate resistances of faulty airbag system parts, such as:-
- DRIVERS AIRBAG:
- PASSENGER AIRBAG:
- SIDE AIRBAG:
- CURTAIN AIRBAG:
- KNEE AIRBAG:
- PELVIS AIRBAG:
- PEDESTRIAN AIRBAG:
- SEAT BELT PRETENSIONERS:
- MOST SRS SYSTEM COMPONENTS WITH AN INFLATOR:
All SRS Products are resistance tested before dispatched. Please see my other items for specific device resistance values. The most common resistances are:- 2.2 Ω, 2.7 Ω & 3.3 Ω:
It's your responsibility to choose the correct resistance.
!!! WARNING !!!
Working on the airbag system is DANGEROUS and should only be repaired by a qualified technician & follow the manufactures safety procedure.
PRECAUTIONS:
Never make any measurement directly on air bag module(s) or seat belt tensioners. A fault in these components is determined by a process of elimination using Resistance Emulator.
To avoid accidental air bag deployment when trouble shooting SRS, DO NOT use self-powered electrical test equipment, such as battery-powered or AC - powered voltmeter, ohmmeter, etc. when air bag module(s) or seat belt tensioners are connected to SRS.
If you are having problems finding the correct resistance for an SRS device, then please watch the video below.
Developed for GARAGES, AUTO ELECTRICIANS & DIY WORLDWIDE.
If you have any questions or concerns about any of my items, please contact me before purchasing.
- AIRBAG / SRS FUSED RESISTORS: I DO NOT guarantee that these items will WORK for you or that the SRS/Airbag light will go out, Please remember this when purchasing.
- YOU UNDERSTAND what these items can be used for and also how to use it as No instructions are provided.
- NOTE: if you have more than one faulty SRS / Airbag device, then you will have to work through them one at a time You may have to reset / clear the SRS / Airbag fault codes in the ECU, every time you select a different resistance, unless you're lucky & select the correct resistance first time.
- This product is NOT a replacement for any SRS / Airbag part & is NOT a reset tool, it has been designed specifically as a diagnostic aid.
- As Per eBay Guidelines , I am Unable To Change Your Shipping Address Once I Received Your Payment.
- If You Wish To Cancel Your Order Then You Can Send Back The unused Item For A Full Refund.
- All my products have been checked and packaged in good condition.
- All Buyers that do not ask for combined postage total invoice or have purchased multiple items. I reserve the right to post all purchased items in the same package. even though you may have paid multiple times. I am unable to refund you for the postage, once you have paid. If you have purchased items from multiple listings, and have paid for standard post, I may at my discretion upgrade the postal service used to a tracked service meaning you will receive all your items at the same time and also safely. This is at my discretion.
- I AM NOT LIABLE FOR ANY DAMAGE CAUSED BY THE USE OF THESE ITEMS; HOWEVER YOU CHOOSE TO USE THEM.
I offer a 30 day money back guarantee. If you are not satisfied with my product, please return it to us within 7 days and I will issue a refund.
Any return of faulty items I will cover the return postal cost. Please note, if you don't want the item for any other reason postal charges is yours. Any return, please send by recorded post only.
If you didn't receive the item, please wait for maximum 14 days and kindly inform me within 14 days. Prior to return, Please contact me, I will give you the return shipping address.
When you receive purchased articles and if you do not require it any more or feel it is not as described, please contact me immediately. I will offer a replacement / full refund for undesired procurement's.
Please note that opening 'Case - Negative Feedback or Neutral Feedback' does not help anyone. In fact, it is a time consuming procedure for eBay and vendor.
Instead, I request you to contact me directly. I assure you that i will try my best to resolve any issues. Rather than use the 'eBay Resolution Centre, please provide me with at least 'Two Working Days' to redress your grievances.
I generally solicit your wholehearted support in this endeavor, thanking you in advance for your understanding.