Water Rocket Launcher
Water rocket launcher
will enable you to send flying ordinary plastic (PET) soda bottles at 80m/250
ft or more! It does not need a long assembly, just an ordinary bicycle pump, a
soft drink bottle and water. With an easy 1 minute set up the Water Rocket is
ready to launch. This launcher does not require advanced settings for each new
bottle and installation materials. This kit is ideal for young science
enthusiasts, especially those interested in rocketry and space flight and for
all who love fun games outdoors. These fun experiments always attract attention
and charm all around!
The parcel will be shipped
with a tracking code.
The kit includes: H-type base, U-type trigger, Pressure-gauge, 2
fasteners, 2 galvanized spikes
Construction details.
The pressure under full control!!!
Metal Release Mechanism!!!
Almost fully assembled! All you need to do is screw
launch pipe and Pressure-gauge into
base! New compact design. The device is made
detachable for easy transport. Used in the manufacture of standard pipe and
fittings. Details are joined by welding (glue is not used). For the plug
connections are used with metal threaded fittings. The pressure gauge is
in robust metal housing.
The kit includes two fasteners for installation on the
lawn (ground) or by means of screws, for example on a wooden surface. This
mounting method provides absolute stability and allows for tilting the
launcher, convenient to install rocket (bottle) without losing water.
The valve allows for the connection of the pump, if
necessary, to relieve pressure in the system. A trigger connected to the base
of 1/2 inch thread. Metal thread coated makes the connection secure and
impervious to corrosion. The sealing rubber ring makes the connections are
tight. The locking cylinder is removable to be able to replace the seal ring to
the launch tube. The launcher tube is made of high-strength PVC pipe reinforced
with fiberglass.
Launch mechanism allows complete control start time.
The presence of the valve allows, if necessary, refuse to run and let the air
out of the system. Vertical launching tube sets the correct trajectory
(right direction of flight) of the bottle / rocket. Launcher has no wooden
parts, deformed and leaving damaged by water. All this allows us to do launches
safe and durable service life launcher.
With our unique mounting design and launch manifold,
it is virtually impossible for a launch failure. Bottle is firmly secured
and will not eject until the launch rope is firmly pulled. Younger youth may
need help pulling the rope as it is secured that firmly.
Advantages of soda rockets: All materials except for
tape can be found in your recycling bin! Rockets can be filled with a bicycle
pump making launching possible anywhere!
Each device is being tested.
Launch
Instructions.
Choose
a safe area such as a huge field or park away from people, trees, and
residences to launch plastic bottles (rockets). Launcher supports most 0.5L, 1L,
1.25L and 2 liter plastic (PET) bottles. Polyethylene terephthalate (PET) is a
thermoplastic polymer resin of the polyester family that is used in soda pop
bottles. Serious bodily injury could result from using any other type of
bottle.
Assemble the launcher.
Secure the launcher with the two included tent pegs so
that it does not move when you pull on the string.
Use only water and/or air for fuel. Fill the bottle
1/6 to 1/3 full of water.
Tilt your launcher and set the bottle or a water
rocket.
Attach the air source to the valve on the launcher. Be
sure all persons are at least 10 feet away from the launcher, then begin
pumping. Launcher supports air pressures between 20 PSI up to 120 PSI. Stop
pumping once you achieve the PSI that you desire. Finally, pull the string from
a safe distance and out of the splash zone to release the trigger and launch
the bottle. Enjoy!
For more information about water rockets look at Youtube channel "Water Rockets Club"