Introduction
New Spot-On 208R SiteMaster Set complete with an electronic self-levelling HVP/DG (horizontal-vertical-plumb-dual grade), red rotary laser level, NiMH rechargeable battery pack & charger, receiver, remote control, tripod and staff.
Rugged, compact, versatile, economic and affordable for faster and more accurate work on-site.
For horizontal, vertical levelling and alignment, 90° layout with plumb & plummet point (up & down) positioning plus dual grade slope setting.
Rotating, scanning, laser point mode and permanent plumb beams, quick set-up easy to operate.
High quality, shockproof and durable construction.
Professional rotary laser level set for interior and exterior applications with the receiver included to extend the working range and remote control to set X/Y slopes.
Special SiteMaster set for large on-site applications including groundworks, setting-out, foundations, slopes, brickwork and site survey.
Also, Interior installations, drywall & suspended ceiling work plus levelling applications over a 500m diameter area.
The rotary laser without the tripod and staff is available on eBay.
For full details, please copy, paste and download the link below:
https://www.ebay.co.uk/itm/262249647167
Accuracy ±0.5mm/10m.
Range 30m Ø / 500m Ø (with receiver included)
Precision high-quality engineering from Fukuda Laser.
Features
Fully automatic, self-levelling horizontal and vertical laser beams.
X/Y and X+Y dual grade slope setting
Permanent plumb beams.
90° layout operation.
Fast electronic levelling sensors
Three rotating speeds.
Four scanning angles.
Automatic drift system with visual alarm when out of level.
Low power indication.
Laser complete with receiver & clamp, remote control, magnetic target, laser enhancement glasses,
rechargeable battery pack & charger, spare alkaline battery holder, padded hard carry case plus instructions.
Set also includes, a 1.65m contactor's tripod and, 5m telescopic levelling staff with E-cm graduations on the front and mm graduations on the back
Technical Specification
Working range - 30m Ø without receiver (subject to ambient light conditions)
500m Ø with receiver (included)
Accuracy - ±0.5mm/10m (horizontal & vertical)
±1.5mm/1.5m (plumb)
Self levelling range - ±5°
Slope range: ±10° X or Y (Tilt X+Y ±14°)
Operation - manual & automatic (self-levelling)
Rotation - clockwise & anti-clockwise
Drift system - automatic
Rotation speed - 0, 60, 120, 300, 600rpm
Scanning angles - 0°, 10°, 45°, 90°, 180°
Remote control range - 20m exterior
30m interior
Sensor - electronic levelling system
Laser diodes - 635nm <10mW
Output power - <1mW Class 2
Temperature range -10°C to +50°C
Dust/water protection - IP54
Power supply 1 - 4 x 1.2v NiMH 4000mAh rechargeable battery pack (included)
Power supply 2: pare alkaline battery holder
Operating time - 40hrs approx
Mount sockets - 5/8in on base
Dimensions - 150 x 128 x 161mm
Weight - 1.5kgs (laser only)
12.0kgs (laser, tripod and staff)
Fukuda Part No - SRL208SMS
Telescopic Levelling Staff
Telescopic levelling staff for Rotary (also Cross & Multi Line) Laser Receivers.
Front with cm-E graduation.
Back with mm graduations, (beginning at the base).
5m levelling staff for steep slopes and deep trench applications, also for groundworks and surveying.
Measuring with Telescopic Levelling Staff
To determine the height difference in the example shown below, the levelling staff is first set up at point A.
Align the receiver with laser beam and note the height measurement.
The staff can now be re-positioned at any Point B and the second height difference measured.
Calculation of height difference
Height A - Height B = Height difference H
E-graduation Scale
This special form of scale graduation can be used for groundworks and distant survey applications.
The E-blocks are 5cm high and the red and black sections indicate alternate meter divisions.