• Compatible Vehicles:
  •  
    • For Infiniti G20 1991-1996
    • For Infiniti M30 1990-1992
    • For Nissan 200SX 1984-1996
    • For Nissan 300ZX 1984-1986
    • For Nissan Altima 1993-2001
    • For Nissan Axxess 1990-1995
    • For Nissan Cube 2009-2014
    • For Nissan Maxima 1985-1988
    • For Nissan Sentra 2000-2022
    • For Nissan Stanza 1982-1992
    • For Nissan Versa 2007-2011
     
  • --If you dont't know the specific of your vehicle, pls confrim by following the below steps:
  •  
  • 1) Check Vehicle Bolt Pattern/ PCD
  •  
  • (2) 4x4.5 1.5 inch Hubcentric Wheel Spacers For Nissan Versa 240SX Sentra Maxima

    Compatible Vehicles:

     

    • For Infiniti G20 1991-1996
    • For Infiniti M30 1990-1992
    • For Nissan 200SX 1984-1996
    • For Nissan 300ZX 1984-1986
    • For Nissan Altima 1993-2001
    • For Nissan Axxess 1990-1995
    • For Nissan Cube 2009-2014
    • For Nissan Maxima 1985-1988
    • For Nissan Sentra 2000-2022
    • For Nissan Stanza 1982-1992
    • For Nissan Versa 2007-2011

     

    --If you dont't know the specific of your vehicle, pls confrim by following the below steps:

     

    1) Check Vehicle Bolt Pattern/ PCD

     

    For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.

     

    5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.

     

    Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.

     

    2) Check Vehicle Hub Bore Size

     

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

     

    3) Check Vehicle Thread Pitch

     

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    --Measure the fender gap to choose suitable thickness.

     

    Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.

     

    Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)

     

    --Step for Installation Wheel Spacers

     


    Item Specifics
    Manufacturer Part Number E115496WAY
    Brand EWAY-motor
    Wheel bolt pattern 4x4.5/ 4x114.3
    Vehicle bolt pattern 4x4.5/ 4x114.3
    Lug Patterns 4 Lugs
    Package Included 2pcs
    Color Sliver
    Studs 12x1.25
    Thickness 1.5"
    Warranty 1 Year
    Stud Grade 10.9
    Inner Diameter 66.1mm
    Material High Quality t6 6061 Billet Aluminum
    Surface Finish CNC Machined Polished Aluminum Finish
    Ship from Ontario,California
    Compatibility Fits Nissan Versa 300ZX 240SX Sentra
    Hubcentirc Yes
    Package Weight 6.99lb
    Superseded Part Number 1.5 inch 4x114.3 to 4x114.3 Wheel Spacers Adapters M12x1.25
    Other Part Number Fits Nissan Sentra 2000 2002 2008
    Interchange Part Number Fits Nissan 240SX 1995 Nissan Versa 2007 2008
    Torqued Down By Hand At 70-80 FT/LB

    Payment
    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
    3.Local pick up is not available.
    4.Orders Will be shipped out from our warehouse in US.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
    Warranty
    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
     6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.
    Returns
    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
    Payments

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    Feedback
    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    (2) 4x4.5 1.5 inch Hubcentric Wheel Spacers For Nissan Versa 240SX Sentra Maxima

    Compatible Vehicles:

     

    • For Infiniti G20 1991-1996
    • For Infiniti M30 1990-1992
    • For Nissan 200SX 1984-1996
    • For Nissan 300ZX 1984-1986
    • For Nissan Altima 1993-2001
    • For Nissan Axxess 1990-1995
    • For Nissan Cube 2009-2014
    • For Nissan Maxima 1985-1988
    • For Nissan Sentra 2000-2022
    • For Nissan Stanza 1982-1992
    • For Nissan Versa 2007-2011

     

    --If you dont't know the specific of your vehicle, pls confrim by following the below steps:

     

    1) Check Vehicle Bolt Pattern/ PCD

     

    For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.

     

    5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.

     

    Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.

     

    2) Check Vehicle Hub Bore Size

     

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

     

    3) Check Vehicle Thread Pitch

     

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

     

    --Measure the fender gap to choose suitable thickness.

     

    Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.

     

    Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)

     

    --Step for Installation Wheel Spacers

     

    Item Specifics
    Manufacturer Part Number :E115496WAY
    Brand :EWAY-motor
    Wheel bolt pattern :4x4.5/ 4x114.3
    Vehicle bolt pattern :4x4.5/ 4x114.3
    Lug Patterns :4 Lugs
    Package Included :2pcs
    Color :Sliver
    Studs :12x1.25
    Thickness :1.5"
    Warranty :1 Year
    Stud Grade :10.9
    Inner Diameter :66.1mm
    Material :High Quality t6 6061 Billet Aluminum
    Surface Finish :CNC Machined Polished Aluminum Finish
    Ship from :Ontario,California
    Compatibility :Fits Nissan Versa 300ZX 240SX Sentra
    Hubcentirc :Yes
    Package Weight :6.99lb
    Superseded Part Number :1.5 inch 4x114.3 to 4x114.3 Wheel Spacers Adapters M12x1.25
    Other Part Number :Fits Nissan Sentra 2000 2002 2008
    Interchange Part Number :Fits Nissan 240SX 1995 Nissan Versa 2007 2008
    Torqued Down By Hand At :70-80 FT/LB


    1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.
    3.Local pick up is not available.
    4.Orders Will be shipped out from our warehouse in US.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
     6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.
    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    All rights reserved.